Coated Leadscrews

Lead screw applications often require ABSSAC to look at enhancements to the standard product in order that higher efficiency or perhaps higher temperatures or duty cycles can be achieved without premature product degradation. One such enhancement of the standard lead screw product is a coating, which can be applied to the product on request. Other coatings such a dry lubricant can also be supplied on request.

Legacy Product

This product is part of our legacy range.
For our updated range of Lead Screws:

Lead screw applications often require Abssac to look at enhancements to the standard product in order that higher efficiencies or perhaps higher temperatures or duty cycles can be achieved without premature product degradation.

If you already have some application parameters that you feel might benefit from such a product enhancement, why not complete and send one of the following general engineering proposal forms or alternatively contact our sales engineering department who will be more than happy to help you.

 

 


Linear guides and rails

Guides & RailsIf you are interested in the using the screw ranges, do not forget that we also supply the full range of linear guides and rails which can provide the load support in your linear mechanism. Offering excellent rigidity and parallelism during operation the guides can be used in both vertical and horizontal planes.

Following the link to that product page Guides

Thrust and radial bearings

 Thrust and radial bearings

Please do not forget to ask for our competitive support bearing prices !

 If you require further technical information, please do not hesitate to contact our sales engineers who will be more than happy to help you with your selection.


Greases and Lubricants

We provide a full range of quality, low cost lubricants for all our linear products including low vapour pressure greases for clean room and vacuum applications. For example the new Trigel line is specifically formulated to offer a lubrication solution for a wide range of linear motion applications. Please ask for further details.  Grease features include, Temperature range -30°C to 150°C,  Revolutionary multi-complex soap technology, Greatly extended lubrication intervals typically 3 times longer than conventional soap thickened greases. Good corrosion resistance. Some greases are supplied blue in colour for high visibility.

  • Coated Leadscrews
  • Coated machined screw and anti-backlash nut
    Coated machined screw and anti-backlash nut
  • 00:00 / 01:00
    • Published: Tuesday 19th April 2016
    • Updated: Wednesday 27th September 2017
    x