Solid Shaft Connection
ABSSAC stocks a wide range of solid (muff) style shaft coupling for fast easy shaft connection. Ideal for 6mm to 50mm diameter shafts, the anodised steel construction is designed for arduous use. Simply release the clamp style design by removing the four bolts...
Monday 13th December 2021
Precision recirculating ball screw range
The low friction within ball screw designs means that a high mechanical efficiency is delivered compared to that of lead screw designs. A typical ball screw may be 90 percent efficient, versus 30 percent efficiency of a lead screw of equal size. Ball screw specification is often a result of an applications requirement to have smooth...
Monday 6th December 2021
Precision Edge Welded bellows
ABSSAC supplies dependable edge-welded bellows and assemblies. Engineers in a broad spectrum of industries rely on bellow products for the highest cycle life, responsive design, wide material selection, and leak-tight performance. Metal bellows provide an all-metal pressure barrier and seal that flexes in one or more directions.
Friday 19th November 2021
Cutom lead screw and nuts
We can supply completely custom linear motion components, or combine our standard products with additional high-performance parts to build lead screw assemblies and linear actuators that solve the most demanding application challenges. Leadscrews are available in a wide range of diameters with an equally large number of leads.
Thursday 11th November 2021
Congratulations ! 11th out of 57 in 2021 season
Congratulations to Mike Tustin ending his season P11 overall, out of 57 registered riders in the Ducatti tri options cup. What a fantastic acheivement. https://t.co/AViJsLvB8g?amp=1As Mike states in his year revew.
Monday 8th November 2021
Reverse engineered at ABSSAC
Abssac recently supplied a set of truly massive rolled lead screws for a cable winding machine refurbishment. Using a 160mm diameter by 16mm lead, the large lead screws were supplied with machined ends and ready to fit. Using its POWER SCREW range of products, the application was a retrofit for some existing screws.
Thursday 28th October 2021
required