CategoriesLinearSpecialistRotaryGreenAbssac

Throwing your profit away on lead screws !

Throwing your profit away on lead screws !
If you are using trapezoidal or acme lead screws and nuts from 10mm to 80mm diameter it might be worth giving Abssac the opportunity to quote. Holding large stocks of both steel and stainless steel screws up to 3metre in length, the screws are complimented by a range of steel, and bronze nuts....
Monday 11th November 2013

On The Go News....

On The Go News....
Take five minutes to read our latest Newsletter. The ABSSAC Ezine is always kept short and informative, whilst hopefully remaining worthwhile to anyone who is a user or buyer of linear and rotary power transmission equipment. This Autumn newsletter predominantly looks at some product advances we have made....
Monday 11th November 2013

Reliable Pump Connection

Reliable Pump Connection
Looking for dependable and quiet performance from your pump, then specify the TB Wood's Sure-Flex® coupling. As standard the 4-way flexing action absorbs virtually all types of shock, misalignment, and shaft end floats by using proven rubber (EPDM), neoprene, or Hytrel sleeves....
Monday 4th November 2013

New Higher Accuracy Ball Screws

New Higher Accuracy Ball Screws
The new PSRT series ball screws from Abssac are a precision rolled format but give near ground ball screw accuracy performance (C5). The units are supplied with the end journals already machined to fit industry standard bearing mounts, saving cost and shortening delivery times.
Wednesday 23rd October 2013

Coupling for Industrial Encoders

Coupling for Industrial Encoders
Controlflex was designed especially for the requirements of shaft encoders. The "industry"  design is ideal for shaft encoders with larger shaft sizes, providing balanced and vibration dampening properties. The design also acts as an electrical insulator between connecting shafts and provides excellent torsional stiffness under duty....
Wednesday 16th October 2013

Solid Shaft Couplings

Solid Shaft Couplings
A solid compression-type coupling or rigid coupling as it is sometimes termed has no flexibility but can effectively be used to connect two shafts to make a permanent joint. The solid coupling is usually designed to be capable of transmitting the full torque load capacity of the shaft....
Thursday 10th October 2013

Search   ABSSAC

x