Nano Accuracy Ground Ball Screw
At Abssac, we offer one of the UK’s largest selections of linear product ranges and you might say, what’s special about that? A customer wanted to move a prism in small increments. Many products offer accuracy grades in microns and that has become the norm. But, how about increments measured in Nano’s?
Monday 9th September 2013
90mm diameter screws delivered to water filtration plant
Using an existing damaged screw for dimensional information, Abssac replicated 14 screws which were a massive 90mm diameter by 2 metres long. Weighing over 100kg each and using a basic trapezoidal thread form satisfied another Abssac customer.
Monday 12th August 2013
Busy day at Abssac
On time and on budget. Abssac delivers 2000+ Stainless Steel nuts to a local customer. Machined, tapped and inspected in the same day, Abssac pushed out the stops to help a customer in a jam. .
Tuesday 30th July 2013
Abssac sponsors Scouts
Abssac recently sponsored the 2013 Scout District Swimming Gala in Evesham. We wish to offer our congratulations to the 2nd Evesham Bengeworth troop for winning the Gala.This sponsorship continues Abssac's core belief to be supportive of the local community.
Wednesday 26th June 2013
Custom ETP EXPRESS
As the U.K. distributor for ETP Transmission (Sweden) a customer came to ABSSAC with the a requirement for a standard ETP EXPRESS clamping bush with a 2inch bore. ABSSAC engineers consulted with ETP engineers after concerns that the radial loads, in combination with rotation bending moment and some torque, could pose a risk of fatigue failure.
Tuesday 11th June 2013
Abssac Stainless lead screws
Stainless lead screw and bronze nuts used to raise and lower homogenizer lifting platform in cosmetic factory. For further details use the following link : http://www.abssac.co.uk/c/Power+Lead+Screws/14/.
Friday 7th June 2013
required