CategoriesLinearSpecialistRotaryGreenAbssac

Filter Press offset coupling does the job

Filter Press offset coupling does the job
.Where there is a need for large parallel offset between rotating shafts with equally large torque requirements - Schmidt offset couplings for printing industry filter press applications are a good fit..http://www.abssac.co.uk/p/Schmidt+Couplings/Schmidt+Offset+Coupling/48/
Wednesday 15th August 2012

Subsea reverser

Subsea reverser
316L stainless steel Self-reversing screw and follower nut custom made to marine specification for subsea applications. http://www.abssac.co.uk/p/Self+reversing+screws/8/.
Friday 10th August 2012

Budgetbeam couplers used in Olympics

Budgetbeam couplers used in Olympics
Low cost BUDGETBEAM couplers used to connect encoders in the opening of the Olympics props - http://www.abssac.co.uk/p/Shaft+Couplings/Budgetbeam+Couplers/63/.
Thursday 9th August 2012

White Paper. Machined Springs vs Wound springs

White Paper. Machined Springs vs Wound springs
Abssac releases a a white paper on the difference between machined springs and wound springs -  http://www.abssac.co.uk/c/Machined+Springs/17/.
Thursday 9th August 2012

Machined Springs created from Thermoplastic Peek

Machined Springs created from Thermoplastic Peek
.http://www.abssac.co.uk/c/Machined+Springs/17/created from Thermoplastic PEEK to allow transparency in X ray devices and still provide high load, constant spring rate, even at high temperature. Please contact the sales department at Abssac for further details. Tel : 01386 421005.
Monday 6th August 2012

STOCKED : Power screws and Nuts

STOCKED : Power screws and Nuts
Lead screws for medium to heavy duty industrial applications can be best supplied through our http://www.abssac.co.uk/c/Power+Lead+Screws/14/ program. Continuously stocking up to 3 meter lengths of lead screw diameters of 12mm, 16mm, 20mm, 22mm, 24mm, 30mm, 36mm, 40mm and 50mm in both right and left handed formats...
Thursday 2nd August 2012
x
check for webp support