Flat Spring aids laser application
Having the unique capability to machine a spring from a solid piece of material Abssac has recently supplied a classic example of is capability. A pancake shaped compression spring 50mm in diameter but only 5mm in height has been produced to hold an ultra thin reflective mirror on its top surface...
Tuesday 22nd January 2013
We go from UTS strength to strength
Our industrial series http://www.abssac.co.uk/p/Universal+Joints/37/ can withstand a higher tensile load than that of our maximum torque rating. This is due to the unique treatments to raise efficiency of pin and block friction surfaces whilst using higher ultimate tensile strength (UTS) materials than many UJ manufacturers.
Friday 14th December 2012
Hydraulic Clamping elements with POWER
. With all the positive benefits of the ETP hydraulic clamping elements, such as compact design, precision mounting and easy clamping the new http://www.abssac.co.uk/p/ETP+Hydraulic+Bushes/ETPPOWER/73/ product delivers the highest performance from the single screw ETP product range.
Saturday 10th November 2012
Medical Imaging Success
Abssac is suppying miniature linear guide rails, only 7mm wide, complete with bearing blocks to complment stainless steel precision lead screws in a medical imaging application. http://www.abssac.co.uk/p/Linear+guides+and+rails/10/.
Saturday 27th October 2012
INJECTION MOULDED SHAFT COUPLINGS
Using the latest injection moulding techniques, Abssac is able to supply a low cost one piece, flexible shaft coupling for lower torque lower cost applications The basic UJ or GJ design consists of a flexible element that can reliably absorb parallel, angular and skewed shaft misalignments.
Tuesday 16th October 2012
ABSSAC Stand C50
The Engineering Design Show opens its doors at the Ricoh Arena tomorrow and we look forward to welcoming you along to our stand C50 - http://www.engineering-design-show.co.uk/.
Tuesday 9th October 2012
required