Categories Linear Specialist Rotary Green Abssac

Precision recirculating ball screw range

The low friction within ball screw designs means that a high mechanical efficiency is delivered compared to that of lead screw designs. A typical ball screw may be 90 percent efficient, versus 30 percent efficiency of a lead screw of equal size. Ball screw specification is often a result of an applications requirement to have smooth...
Monday 6th December 2021

Precision Edge Welded bellows

ABSSAC supplies dependable edge-welded bellows and assemblies. Engineers in a broad spectrum of industries rely on bellow products for the highest cycle life, responsive design, wide material selection, and leak-tight performance. Metal bellows provide an all-metal pressure barrier and seal that flexes in one or more directions.
Friday 19th November 2021

Cutom lead screw and nuts

We can supply completely custom linear motion components, or combine our standard products with additional high-performance parts to build lead screw assemblies and linear actuators that solve the most demanding application challenges. Leadscrews are available in a wide range of diameters with an equally large number of leads.
Thursday 11th November 2021

Congratulations ! 11th out of 57 in 2021 season

Congratulations to Mike Tustin ending his season P11 overall, out of 57 registered riders in the Ducatti tri options cup. What a fantastic acheivement. https://t.co/AViJsLvB8g?amp=1As Mike states in his year revew.
Monday 8th November 2021

Reverse engineered at ABSSAC

Abssac recently supplied a set of truly massive rolled lead screws for a cable winding machine refurbishment. Using a 160mm diameter by 16mm lead, the large lead screws were supplied with machined ends and ready to fit. Using its POWER SCREW range of products, the application was a retrofit for some existing screws.
Thursday 28th October 2021

The Schmidt coupling offsets like no other shaft coupling

Schmidts' classic design for extreme parallel shaft offset. The Schmidt-Kupplung is a compact, torsionally stiff performance shaft coupling that compensates for variable parallel shaft offset without side loads during operation. The extreme shaft offset capability combined with a small D.
Tuesday 12th October 2021