Machined torsion springs, as the name suggests, are machined from a solid piece of material.
Using F.E.A to optimise performance, we can provide very precise, linear deflection rates because virtually all-residual internal stresses are eliminated. Most wound torsion springs can achieve a rate of around 15%...
Thursday 5th November 2009
Abssac’s Helical Beam shaft couplings can take the hassle out of connecting drive shafts. Commonly used as one of the best ways of transmitting rotation from one shaft to another without backlash or torque loss...
Monday 12th October 2009
Low cost ball screw aids restoration
A quick turnaround by Abssac has aided the restoration of two pre WW11 machine tools being restored to their former glory in a local woollen mills maintenance workshop. Despite the customer being without the original dimensional drawings for the ball screws and the fact that they were very much damaged...
Thursday 20th August 2009
Latest flyer uses vegetable inks
Our latest flyer has been printed on paper stock that is certified to come from sustainable forests and printed using vegetable based inks.
Tuesday 7th July 2009
New Letter headed paper uses FSC
ABSSAC has recently printed its new letter headed paper using FSC accredited paper .
Wednesday 10th June 2009
Power screws in STOCK
Abssac has recently invested heavily in the stock of trapezoidal thread form power screws and nuts in what is seen as a very competitive move in the market. Now stocking 3 meter lengths of lead screw diameters of 12mm, 16mm, 20mm, 22mm, 24mm, 30mm, 36mm, 40mm and 50mm in both right and left handed formats.
Monday 1st June 2009