Categories Linear Specialist Rotary Green Abssac

Doors Open at Engineering Design Show

A very warm welcome is extended to all those visitors to the Engineering Design show at the Ricoh Centre Coventry today. Abssac is situated in the middle of the Hall on Stand E35 where we are showing all of our innovative linear and rotary products. We look forward to meeting you in person over the next few days....
Wednesday 2nd October 2013

4-way Flexing Action

The name TB Wood’s Sure-Flex®  Product has long been associated with quality. TB Wood’s Sure-Flex® couplings utilises a rubber (EPDM), Neoprene, or Hytrel sleeve between two cast hubs. The flexible element allows 4-way flexing action and absorbs virtually all types of shock, misalignment, and end float....
Tuesday 17th September 2013

Quick Mounting and Accurate Hub Connections

The scientist Blaise Pascal formulated the principle of pressure propagation in liquids many years ago: Pascal's law or the principle of transmission of fluid-pressure states that , ”pressure exerted anywhere in a confined incompressible fluid is transmitted equally in all directions ...
Monday 16th September 2013

Nano Accuracy Ground Ball Screw

At Abssac, we offer one of the UK’s largest selections of linear product ranges and you might say, what’s special about that? A customer wanted to move a prism in small increments. Many products offer accuracy grades in microns and that has become the norm.  But, ...
Monday 9th September 2013

Abssac LEAD's the way....

Abssac Limited will be showing its full range of precision lead screws and nuts at the forthcoming Engineering Design Show at the Ricoh Centre. (Stand No : E35) As one of the only suppliers on the market to truly offer a miniature lead screw product, Abssac overcomes significant technical ...
Thursday 15th August 2013

90mm diameter screws delivered to water filtration plant

Using an existing damaged screw for dimensional information, Abssac replicated 14 screws which were a massive 90mm diameter by 2 metres long. Weighing over 100kg each and using a basic trapezoidal thread form satisfied another Abssac customer. If you have a linear application, a tight ...
Monday 12th August 2013