Categories Linear Specialist Rotary Green Abssac

The Schmidt coupling offsets like no other coupling.

When designing new machines the parallel alignment of the shafts is always paramount. However some applications actually require that parallel offset to be dynamic during operation and well above and beyond the capabilities of standard shaft couplings. To achieve the exaggerated...
Wednesday 24th June 2020

Solid, robust and cost effective solid shaft couplings

The ideal shaft coupling for fast, rigid and easy shaft connection. Ideal for 6mm to 50mm diameter shafts, the Steel or Stainless Steel construction is designed for specifically for arduous use. Holding tight tolerances to the concentricity on the bore, makes the ABSSAC rigid coupling an ideal emergency fix or prototype connection.
Monday 15th June 2020

ETP-CLASSIC – Where it all started!

Connecting shafts and hubs securely is one of engineerings basic requirements. The accuracy, reliability and ease of connection have always been the challenge and ETP met that challeange many years ago with the ETP CLASSIC design. This was ETP’s original product which employs stand alone hydraulic technology consisting of a hardened...
Thursday 14th May 2020

Shaft coupling saves fish

The Challenge was to develop a flexible shaft coupling that could be used in the drive assembly of a “Aerator” used in the oxygenation of water in fish spawning ponds and small lakes. Aeration is especially required in times of hot weather where the oxygen concentration within the water can fall and have a detrimental effect...
Monday 4th May 2020

Custom clutches and brakes

Custom Clutches and Brakes - If the demand is there, we are happy to explore new designs that can give your application leading edge technology in braking and clutch control. Why not call one of our engineers to discuss further..
Thursday 13th February 2020

Fast, reliable and accurate hub and shaft connection

With names like ETP Express, ETP Express R, ETP Power and ETP Techno, these products are, as it sounds, designed for a multitude of applications. In each case only a single screw is used for mounting and dismounting of the hub.
Monday 20th January 2020