Our industrial series http://www.abssac.co.uk/p/Universal+Joints/37/ can withstand a higher tensile load than that of our maximum torque rating.  This is due to the unique treatments to raise efficiency of pin and block friction surfaces whilst using higher ultimate tensile strength (UTS) materials than many UJ manufacturers.

Abssac is suppying miniature linear guide rails, only 7mm wide, complete with bearing blocks to complment stainless steel  precision lead screws in a medical imaging application. http://www.abssac.co.uk/p/Linear+guides+and+rails/10/.

Using the latest injection moulding techniques, Abssac is able to supply a low cost one piece, flexible shaft coupling for lower torque lower cost applications The basic UJ  or GJ design consists of a flexible element that can reliably absorb parallel, angular and skewed shaft misalignments.

The Engineering Design Show opens its doors at the Ricoh Arena tomorrow and we look forward to welcoming you along to our stand C50 - http://www.engineering-design-show.co.uk/.

The cold rolled, wear resistant range of Abssac high helix motion screws provide high linear speeds and deliver an efficiency which is nothing short of impressive. These high-helix lead screws for motion and positional applications can have multi start thread forms up to 10 times the given diameter and provide...

Custom lead screws for nuclear and marine applications with material traced to source using  EN10204 3.1. with full test certification.  Trapezoidal motion screws from the. http://www.abssac.co.uk/c/Power+Lead+Screws/14/ at Abssac can be created in non-standard materials to specific yield and tensile Mpa requirements with...