Categories Linear Specialist Rotary Green Abssac

Worth a look

If you currently use Jaw couplings within your plant or application, Abssac has invested in large stocks of both hubs and elastomeric spiders. We aim to give the keenest prices and prompt delivery. Hubs are pre-bored to suit shafts from 6mm to 100mm along with standard keyways.  Give Stacey a call on 01386 421005.
Thursday 2nd January 2014

XYZ Axis Drive Shaft Couplings

The Heli-Cal flexible shaft coupling is ideal for use with XYZ axis drives. Delivering zero-backlash drive transmission the high torsional stiffness and one peice integrity provides a cost effective connection solution. Abssac stocks a complete range of pre-bored Helical Couplings for immediate delivery.
Monday 16th December 2013

Throwing your profit away on lead screws !

If you are using trapezoidal or acme lead screws and nuts from 10mm to 80mm diameter it might be worth giving Abssac the opportunity to quote. Holding large stocks of both steel and stainless steel screws up to 3metre in length, the screws are complimented by a range of steel, and bronze nuts.
Monday 11th November 2013

On The Go News....

Take five minutes to read our latest Newsletter. The ABSSAC Ezine is always kept short and informative, whilst hopefully remaining worthwhile to anyone who is a user or buyer of linear and rotary power transmission equipment. This Autumn newsletter predominantly looks at some product advances we have made.
Monday 11th November 2013

Reliable Pump Connection

Looking for dependable and quiet performance from your pump, then specify the TB Wood's Sure-Flex® coupling. As standard the 4-way flexing action absorbs virtually all types of shock, misalignment, and shaft end floats by using proven rubber (EPDM), neoprene, or Hytrel sleeves.
Monday 4th November 2013

New Higher Accuracy Ball Screws

The new PSRT series ball screws from Abssac are a precision rolled format but give near ground ball screw accuracy performance (C5). The units are supplied with the end journals already machined to fit industry standard bearing mounts, saving cost and shortening delivery times..
Wednesday 23rd October 2013