Categories Linear Specialist Rotary Green Abssac

Machined Calibration Springs

Machined springs by Abssac used  as a “bench-mark” to calibrate material testing instruments due to their 100% repeatable linear spring rates.To calibrate and certify for  tension, compression, flexure, fatigue, impact/hardness. Machined springs
Tuesday 28th August 2012

Filter Press offset coupling does the job

Where there is a need for large parallel offset between rotating shafts with equally large torque requirements - Schmidt offset couplings for printing industry filter press applications are a good fit.
Wednesday 15th August 2012

Subsea reverser

316L stainless steel Self-reversing screw and follower nut custom made to marine specification for subsea applications. http://www.abssac.co.uk/p/Self+reversing+screws/8/
Friday 10th August 2012

Budgetbeam couplers used in Olympics

Low cost BUDGETBEAM couplers used to connect encoders in the opening of the Olympics props - Click here for further product details
Thursday 9th August 2012

White Paper. Machined Springs vs Wound springs

Abssac releases a a white paper on the difference between machined springs and wound springs -  Click here
Thursday 9th August 2012

Machined Springs created from Thermoplastic Peek

Machined Springs created from Thermoplastic PEEK to allow transparency in X ray devices and still provide high load, constant spring rate, even at high temperature. Please contact Chris Cattle at Abssac for further details. Tel : 01386 421005
Monday 6th August 2012