Friday 1st June 2018

Trapezoidal screws and nuts from stock

ABSSAC stocks trapezoidal lead screws for industrial and precision applications and most importantly, have knowledgeable sales staff on hand to help with customer selection.

Normally referred to as the POWER SCREWS PROGRAM, they suited for the more industrial type applications where lead accuracy is in the range of 0.1mm per 300mm of linear travel.  POWER lead screw and nut combinations are a cost effective and reliable way of converting rotary motion into a linear motion. The speed, the load and the accuracy of position has a direct effect on the form and physical size of the lead screw and nut design. ABSSAC’s engineering staff can provide valuable input in the optimisation of the design phase or refurbishment of an end product.

All POWER SCREW products can be supplied with a range of flanged, cylindrical and hex style nuts in Stainless Steel, Steel, Bronze and Plastic. Stocking up to 3 meter lengths of lead screw diameters of 12mm, 16mm, 20mm, 22mm, 24mm, 30mm, 36mm, 40mm and 50mm in both right and left handed formats.  With a choice of leads from 0.25mm to 200mm, and rolled to precision accuracy. ABSSAC will also supply the leadscrews machined at the ends to fit radial or thrust bearing units which can be supplied at very competitive prices.

If you use leadscrews and nuts or perhaps you are considering the product within your designs, then give ABSSAC a call.

ABSSAC also welcomes reverse engineering applications.

Tel: 01386 421005

Find out more