CategoriesLinearSpecialistRotaryGreenAbssac

High Helix Lead Screws

High Helix Lead Screws
If you need to move a load quickly for a low rotational input speed, then perhaps consider the high helix lead screw ranges which can offer leads of up to 6 x the diameter of the screw. This multi-start...
Tuesday 4th May 2021

Self reversing screws

Self reversing screws
A traditional lead screw and nut combination requires the driven screw to change its direction of rotation to enable the nut to return to its original start position. However, in certain applications, it may be advantageous to maintain a single direction of rotation of the screw but still have the nut return to the start position.
Monday 12th April 2021

Ultra finite thread leads with Satellite roller screws

Ultra finite thread leads with Satellite roller screws
A satellite roller screw can be designed to deliver incredibly small and accurate leads than ballscrew designs. The lead of roller screws (axial travel per revolution of the screw) can be very manufactured with finite tolerances and minute lead accuracy. Typically leads are limited to 1mm for small diameters of the standard RV satellite series...
Monday 8th February 2021

Decades of precision ball screw supply

Decades of precision ball screw supply
ABSSAC will shortly be celebrating 4 decades of power transmission equipment supply and over that time certain approved suppliers have demonstrated a steadfast approach to quality, professionalism and long term strategic commercial thinking.  ABSSAC is the long-term United Kingdom distribution partner for KSS Co.
Tuesday 2nd February 2021

KSS Ball screws - Unmatched quality assurance and reliability.

KSS Ball screws - Unmatched quality assurance and reliability.
For many decades our preferred supplier, KSS Co of Japan has been choosen for the precision rolled and ground ball screws for diameters from 1.8mm to 25mm. KSS Co offer second to none manufacturing techniques, unmatched quality assurance and reliability. Any precision linear application would benefit from the quality assured product range...
Thursday 21st January 2021

Finding the right leadscrew and nut combination

Finding the right leadscrew and nut combination
Finding the right leadscrew and nut combination for an application requires an understanding of the screw profile, available materials, and naturally, the parameters of the physical demands of the system. ABSSAC had decades upon decades of application experience which can be employed into the product specification.
Monday 4th January 2021
x
check for webp support