Linear Proposal Form

At Abssac we employ the traditional hands on approach to everything we do, which after all, is the building block of engineering. If you require assistance specifying a product, it helps us greatly to have as much information about your application parameters as possible.

This on line form asks all the pertinent questions we need to ensure we can specify the correct part. However, should you wish to discuss your application with one of engineers please do not hesitate to contact us by telephone on 01386 421005


required  required

Your Details

required
required
required
required
required
required

Your Requirements

Load is in tension
Load is in compression
Load is in both
Load is constant
Load is variable
Continuous Operation
Intermittent Operation
Variable
Screw Will Be Driven
Nut Will Be Driven

The force that will be applied to the nut to rotate the screw (back driven screw)
Vertical
Horizontal
Other
Yes
No
Yes
No
Yes
No
:   Tolerance   mm
Yes
No
:   Tolerance   mm
Will operate at normal room temperatures
Will operate at very high temperatures (above 150f / +65 °C)
Will operate at very low temperatures (below 0f/ -17 °C)
Will operate in very dirty / dusty conditions
Will operate where metal chips are present
Will operate in corrosive atmosphere
Yes
No
Yes
No
mm/mm
If you want to order the screws with the ends already machined to your specifications, submit a sketch or drawing with details and tolerances required via email to sales@abssac.com
Please submit any additional data you feel would be helpful to us in selecting the proper screw size and in submitting your quotation. Attach drawings of screw and nut if available.
Suggestions, help and advice is given in good faith but without responsibility. It remains the responsibility of the customer or end user to ensure that the product chosen meets their life, duty cycle and other performance criteria.
required

 

Search   ABSSAC

x