At Abssac, we concentrate on the flanged mount and square mount versions of linear guides.

These items are in stock and have proven to be the best linear guide solution when teamed up with any of our  ball and  lead screw products. Dimensional data for these models can be accessed by the buttons above but we do encourage you to contact our knowledgeable sales team who can help you with the right selection..

By primarily using a four ball path design, within the slide, allows the guides to accept up to 30% more load and up to 30% stiffer than similar products in the market. An added bonus is that the ball bearings are retained within the housing so that should the guides come off the end of the rail, you will not be faced with all the ball bearings falling out. From experience, we know that this advantage can also significantly aid in the final assembly.

Typical Guide applications include;

  • Grinders
  • NC Lathes
  • Machining centres
  • Precision milling
  • Automation technology
  • Transportation technology
  • Measuring applications
  • Machines that require a high level of positional accuracy
  • Ideal for use with our Transport ball screw ranges

 

We also offer the advantage of supplying lightly pre-loaded heavy duty or extra heavy duty guide models to suit individual applications. When compared to other slide mechanisms such as dovetail slides, efficiency is far greater. The linear guides can carry loads in both horizontal and vertical directions. Please also note that the  rails are pre drilled for ease of fitting and can be delivered cut to your desired length at no extra cost. Please note that all guides come with dust proofing  seals at each end.

Please call us and ask for our linear expert Phil Jones for further details on 01386 421005


Linear Guides and Rails diagram

Available rail widths from 15mm to 65mm cater from the lightest to the heaviest load.  If your application requires an accurate support and guide, our ex-stock range of linear rails may be the answer to your design challenges. Rails can be supplied from 100mm to 4000mm in length and in some cases can be attached to the application from beneath.

Typical performance data

HG Series 25,30,35NormalHighPrecisionSuper precisionUltra precision
Accuracy Class+/- 0.1mm+/- 0.04mm+/- 0+/- 0+/-0
Height Tolerance H1+/- 0.1mm+/- 0.04mm+ 0 / -0.04mm+0/0.02mm+0/0.01mm
Width Tolerance N1+/-0.1mm+/- 0.04mm+0 / -0.04mm+0/0.02mm+0/-0.01mm

Flanged Mount Slide

HGW Diagram

ModelINSTALLATION
DIMENSIONS (mm)
DIMENSIONS OF THE GUIDE (mm)DIMENSIONS OF
THE GUIDE RAIL (mm)
SCREWS FOR RAIL (mm)DYNAMIC LOAD Cdyn (N)STATIC LOAD C0 (N)STATIC MOMENTMASS
HH1NWBB1CL1LGMTT1T2H2H3WRHRDhdPMo (Nm)Mx (Nm)MY (Nm)Guide (kg)Rail (kg/m)
HGW15CC244.31647384.53039.461.45.3M568.96.954.55.515157.55.34.560M4x1611380253101701501500.171.45
HGW20CC
HGW20HC
304.621.5635354050.5 65.277.5 90.312M68109.5672017.59.58.5660M5x1617750
21180
37840 48840380 480270
470
270
470
0.51
0.52
2.21
HGW25CC
HGW25HC
365.523.570576.54558 78.683 103.612M881410692322119760M6x2026480 3275056190 76000640 870510
880
510
880
0.78
0.80
3.21
HGW30CC
HGW30HC
42631907295270 9397.4 120.412M108.516106.510.828261412980M8x2538740 4727083060 1101301060 1400850
1470
850
1470
1.42
1.44
4.47
HGW35CC
HGW35HC
487.5331008296280 105.8112.4 138.212M1010.11813912.634291412980M8x2549520 60210102870 1363101730 22901200
2080
1200
2080
2.03
2.06
6.3
HGW45CC
HGW45HC
609.537.5120100108097 128.8138 169.812.9M1215.122158.520.54538201714102M12x3577570 94540155930 2071203010 40002350
4070
2350
4070
3.54
3.69
10.41
HGW55CC
HGW55HC
701343.51401161295117.7 155.8165.7 203.812.9M1417.526.51712195344232016120M14x45114440 139350227810 3012605660 74904060
7010
4060
7010
5.38
5.96
15.08
HGW65CC
HGW65HC
901553.517014214110144.2 203.6198.2 257.612.9M162537.52315156353262218150M16x50163630 208360324710 45715010020 14150

6440
11120

6440
11120
9.17
12.89
21.18

Square Mount Slide

HGH Diagram

ModelINSTALLATION
DIMENSIONS(mm)
DIMENSIONS OF THE GUIDE (mm)DIMENSIONS OF
THE GUIDE RAIL (mm)
SCREWS FOR RAIL (mm)DYNAMIC LOAD Cdyn (N)STATIC LOAD C0 (N)STATIC MOMENTMASS
HH1NWBB1CL1LGMxlTH2H3WRHRDhdPMo (Nm)Mx (Nm)MY (Nm)Guide (kg)Rail (kg/m)
HGH15CA284.39.5342642639.461.45.3M4x568.59.515157.55.34.560M4x1611380253101701501500.181.45
HGH20CA HGH20HA304.6124432636 5050.5 65.277.5 90.312M5x68672017.59.58.5660M5x1617750 2118037840 48840380 480270
470
270
470
0.38
0.39
2.21
HGH25CA HGH25HA405.512.548356.535 5058 78.683 103.612M6x8810132322119760M6x2026480 3275056190 76000640 870510
880
510
880
0.67
0.69
3.21
HGH30CA HGH30HA4561660401040 6070 9397.4 120.412M8x108.59.513.828261412980M8x2538740 4727083060 1101301060 1400850
1470
850
1470
1.14
1.16
4.47
HGH35CA HGH35HA557.518705010507280 105.8112.4 138.212M8x1210.21619.634291412980M8x2549520 60210102870 1363101730 22901200
2080
1200
2080
1.88
1.92
6.3
HGH45CA HGH45HA709.520.586601360 8097 128.8138 169.812.9M10x171618.530.54538201714105M12x3577570 94540155930 2071203010 40002350
4070
2350
4070
3.54
3.61
10.41
HGH55CA HGH55HA801323.51007512.57595117.7 155.8165.7 203.812.9M12x1817.522295344232016120M14x45114440 139350227810 3012605660 74904060
7010
4060
7010
5.38
5.49
15.08
HGH65CA HGH65HA901531.5126762570120144.2 203.6198.2 257.612.9M16x202515156353262218150M16x50163630 208360324710 45715010020 14150

6440
11120

6440
11120
7.00
9.82
21.18

Search   ABSSAC

x