SERIES 0002 - 0010 WITH ALUMINIUM CLAMBING RING 0,2 - 12 Nm				SERIES 0015 - 0060 WITH ALUMINIUM CLAMBING HUB 5 - 80 Nm			SERIES 0150 - 1500 WITH STAHL CLAMBING HUB 20 - 1800 Nm
Specification	SERIES	2	5	10	15	30	60	150	200	300	500	800	1500
Adjustment range available from - to (approx values) (Nm)	TKN	0.2-1.5	1-5	2-6	5-15	5-15	10-30	20-70	40-100	80-200	80-200	350-650	500-900
		Adjustment rangeavailable from - to(approx values) (Nm)	0.5-2.2	TKN	3-6	4-12	8-20	10-30	25-80	50-150	80-240	150-250	200-400	500-800	700-1300
	Adjustment rangeavailable from - to(approx values) (Nm)					Adjustment rangeavailable from - to(approx values) (Nm)	Adjustment rangeavailable from - to(approx values) (Nm)	Adjustment rangeavailable from - to(approx values) (Nm)									200-320	250-500		1000-1800
Actuation dist.** (mm)		0.8	0.8	1.2	1.5	1.7	1.7	1.9	2.2	2.2	2.2	2.2	3
** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges.														** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges.	** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges.	** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges.	** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges.	** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges.	** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges.	** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges.	** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges.	** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges.	** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges.	** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges.	** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges.	** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges.
Adjustment range (F) available from - to (Nm) full disengagement version (F) (approx values)	TKN	XX	XX	2-5	7-15	8-20	15-30	40-80	60-120	60-180	80-150	200-400	700-1200
	Adjustment range (F)available from - to (Nm)full disengagementversion (F) (approx values)				Adjustment range (F)available from - to (Nm)full disengagementversion (F) (approx values)	Adjustment range (F)available from - to (Nm)full disengagementversion (F) (approx values)	4-10		15-30	30-60	80-150	100-220	160-300	100-600	400-650	1000-1500
	Adjustment range (F)available from - to (Nm)full disengagementversion (F) (approx values)				8-15	Adjustment range (F)available from - to (Nm)full disengagementversion (F) (approx values) 8-15	Adjustment range (F)available from - to (Nm)full disengagementversion (F) (approx values) 8-15										280-400	250-500	450-850	1500-1800
																					700-1000	1600-2000
Overall length (mm)	A1	46	57	65	75	87	102	116	128	139	163	190	223
	Overall length (mm)	A2	51	65	74	82	95	112	128	140	153	177	XX	XX
Overall length full disengagement (mm)	A1F	XX	XX	65	75	87	102	118	131	142	167	201	232
	Overall lengthfull disengagement (mm)	A2F	XX	XX	74	82	95	112	130	143	156	181	XX	XX
Actuation ring Ø (mm)	B	30	36	46	56	66	74	93	100	121	136	153	175
Actuation ring Ø full disengagement (mm)	BF	XX	XX	51.5	62	71	84	99	118	132	155	177	187
Clambing fit length (mm)	C	13	16	16	22	27	31	35	40	42	51	48	67
Inner diameter Ø from Ø-Ø H7 (mm)	D1 D2	4-12	5-14	6-20	10-26	12-30	15-32	19-42	24-45	30-60	35-60	40-75	50-80
Diameter (mm)	D3	12.1	14.1	20.1	21.1	24.1	32.1	36.1	42.1	58.1	60.1	60.1	68.1
Outside diameter of Hubs (mm)	E	25	32	40	49	55	66	81	90	110	123	134	157
Distance (mm)	F	13	15	17	19	24	28	31	35	35	45	50	63
Distance**² full disengagement (mm)	FF	XX	XX	16	19	22	29	30	33	35	43	54	61
**² = The distance (FF) of a full disengagement version depends on, how much springs are needed.														**² = The distance (FF) of a full disengagement version depends on, how much springs are needed.	**² = The distance (FF) of a full disengagement version depends on, how much springs are needed.	**² = The distance (FF) of a full disengagement version depends on, how much springs are needed.	**² = The distance (FF) of a full disengagement version depends on, how much springs are needed.	**² = The distance (FF) of a full disengagement version depends on, how much springs are needed.	**² = The distance (FF) of a full disengagement version depends on, how much springs are needed.	**² = The distance (FF) of a full disengagement version depends on, how much springs are needed.	**² = The distance (FF) of a full disengagement version depends on, how much springs are needed.	**² = The distance (FF) of a full disengagement version depends on, how much springs are needed.	**² = The distance (FF) of a full disengagement version depends on, how much springs are needed.	**² = The distance (FF) of a full disengagement version depends on, how much springs are needed.	**² = The distance (FF) of a full disengagement version depends on, how much springs are needed.	**² = The distance (FF) of a full disengagement version depends on, how much springs are needed.
Distance (mm)	G	4	5	5	6.5	7.5	9.5	11	12.5	13	17	18	22.5
Screw ISO 4762 tightening torque (Nm)	I	M3	M4	M4	M5	M6	M8	M10	M12	M12	M16	2xM16	2xM20
		Screw ISO 4762tightening torque (Nm)	2	I	4	4.5	8	15	40	70	120	130	200	250	470
Distance between centers (mm)	P	8	10	15	17	19	23	27	31	39	41	2x48	2x55
Moment of inertia (10-3kgm2)	Jges	0.01	0.02	0.06	0.1	0.27	0.75	2.5	5.1	11.5	22.8	42	83
		Moment of inertia (10-3kgm2)	0.01	Jges	0.02	0.07	0.15	0.32	0.8	2.8	5.3	11.8	23
Torsion stiffness (10³Nm/rad)	CT	1.2	7	9	20	39	76	175	191	420	510	780	1304
		Torsion stiffness (10³Nm/rad)	1.3	CT	5	8	15	28	55	110	140	350	500
Lateral ±(mm)	values	0.15	0.2	0.2	0.15	0.2	0.2	0.2	0.25	0.25	0.3	0.35	0.35
	Lateral ±(mm)	max	0.2	0.25	0.3	0.2	0.25	0.25	0.25	0.3	0.3	0.35
Angular	values	1	1.5	1.5	1	1	1	1	1.5	1.5	2	2.5	2.5
	Angular	max	1.5	2	2	1.5	1.5	1.5	1.5	2	2	2.5
Lateral spring stiffness (N/mm)	max	40	290	280	475	900	1200	1550	2040	3750	2500	2000	3600
	Lateral springstiffness (N/mm)	values	30	45	145	137	270	420	435	610	1050	840
Approx weight (kg)		0.065	0.2	0.3	0.4	0.7	1	2.4	4	5.9	9.6	14	21