CategoriesLinearSpecialistRotaryGreenAbssac

Split nut saves time

Split nut saves time
Another satisfied customer required a more sophisticated nut design for use within a hot glue dispensing machine.By supplying a specifically designed bronze nut to match a 20mm diameter by 4mm lead trapezoidal power screw, the bronze nut was then meticulously separated into two halves....
Tuesday 14th June 2011

High vacuum lead screw

High vacuum lead screw
Abssac limited has long been associated with supplying products into the nuclear physics industry and has recently maintained this trend by supplying lead screw and nut assemblies for use within a high vacuum diagnostic tool for particle accelerators.The leadscrew assembly was used ...
Monday 21st March 2011

POWER LEAD SCREWS

POWER LEAD SCREWS
Looking for a competitive quote. At Abssac we stock up to 3 meter lengths of  trapezoidal thread form power screws and nuts in both right and left handed formats.  Abssac is committed to reducing the unit prices of its linear products.  Also stocking flanged or non flanged Bronze nuts as well as round, hex and square steel nuts....
Friday 17th September 2010

Medical lead screw

Medical lead screw
Miniature lead screw designs have often been challenging with regards to application performance verses reliability and cost. A recent medical application supplied by Abssac Limited proposed some significant technical obstacles, which were successfully overcome.Using a 3mm diameter ...
Friday 20th August 2010

Thermoplastic ball screw

Thermoplastic ball screw
Abssac continues to be the centre of linear technical innovation for the UK. In 2010 we launched the smallest ball screw on the market which has a mere 1.8mm screw diameter. Abssac is now proud to offer a complete ball screw and nut assembly manufactured entirely out of thermoplastic....
Thursday 1st July 2010

Helical flexure helps die cutter efficiency

Helical flexure helps die cutter efficiency
Abssac has aided the design of a cellophane packaging machine manufacturer utilising its helical flexure technology in a die punch design. Abssac was tasked with improving the life of a plastics die cutter which was prematurely blunting on high volume runs. The die cutter was ...
Wednesday 19th May 2010

Search   ABSSAC

x