CategoriesLinearSpecialistRotaryGreenAbssac

Nano Accuracy Ground Ball Screw

Nano Accuracy Ground Ball Screw
At Abssac, we offer one of the UK’s largest selections of linear product ranges and you might say, what’s special about that?A customer wanted to move a prism in small increments. Many products offer accuracy grades in microns and that has become the norm.  But, ...
Monday 9th September 2013

90mm diameter screws delivered to water filtration plant

90mm diameter screws delivered to water filtration plant
Using an existing damaged screw for dimensional information, Abssac replicated 14 screws which were a massive 90mm diameter by 2 metres long. Weighing over 100kg each and using a basic trapezoidal thread form satisfied another Abssac customer. If you have a linear application, a tight ...
Monday 12th August 2013

Busy day at Abssac

Busy day at Abssac
On time and on budget. Abssac delivers 2000+ Stainless Steel nuts to a local customer. Machined, tapped and inspected in the same day, Abssac pushed out the stops to help a customer in a jam. 
Tuesday 30th July 2013

Lead screws used in home entertainment system

Lead screws used in home entertainment system
Abssac has been working closely with a team of interior designers to complete a home cinema entertainment system for a number of newly built apartments.Costing an estimated 3 million pounds per apartment, each home came supplied with a fully automatic entertainment room. Using primarily  ...
Tuesday 16th July 2013

Abssac sponsors Scouts

Abssac sponsors Scouts
Abssac recently sponsored the 2013 Scout District Swimming Gala in Evesham. We wish to offer our congratulations to the 2nd Evesham Bengeworth troop for winning the Gala.This sponsorship continues Abssac's core belief  to be supportive of the local community.
Wednesday 26th June 2013

Custom ETP EXPRESS

Custom ETP EXPRESS
As the U.K. distributor for ETP Transmission (Sweden) a customer came to ABSSAC with the a requirement for a standard ETP EXPRESS clamping bush with a 2inch bore. ABSSAC engineers consulted with ETP engineers after concerns that the radial loads, in combination with rotation bending moment and some torque, could pose a risk of fatigue failure....
Tuesday 11th June 2013

Search   ABSSAC

x