loading
x

Bearings for Lead Screw & Ball Screw

ABSSAC Precision Motion Since 1982

ABSSAC

LEAD SCREW & BALL SCREW SUPPORT SYSTEMS

IDEAL COMPANION FOR TRANSPORT LEAD SCREWS AND BALL SCREWS.
FIXED TYPES CAN BE USED BOTH ENDS FOR EXTRA LOAD CAPACITY.

ALL TYPES FROM SIZE 10 TO SIZE 40 FROM STOCK.

BK (FIXED) PEDESTAL TYPE

BK (FIXED) PEDESTAL TYPE

With paired precision a/c bearings
for drive end mounting

BF (SIMPLE) PEDESTAL TYPE

BF (SIMPLE) PEDESTAL TYPE

With single row radial bearing for
non drive end mounting

FK (FIXED) FLANGE TYPE

FK (FIXED) FLANGE TYPE

With paired precision a/c bearings
for drive end mounting

FF (SIMPLE) FLANGE TYPE

FF (SIMPLE) FLANGE TYPE

With single row radial bearing for
non drive end mounting

SCREW ENDS MACHINED TO SUIT THESE AND OTHER BEARING TYPES.

ALL TYPES OF MACHINED SCREW END FEATURES AVAILABLE.

Please enquire for dimensional and performance information.

T: +44 (0)1386 421005F: +44 (0)1386 422441E: sales@abssac.co.ukW: www.abssac.co.uk
ABSSAC

INDEX

  1. Support Unit BK (fixed-side rectangular type)
  2. Support Unit BF (supported-side rectangular type)
  3. Support Unit FK (fixed-side round type)
  4. Support Unit FF (supported-side rectangular type)
  5. Type of support units and applicable ball screw diameters
  6. Recommended shaft end shape (fixed-side) for BK support units types
  7. Recommended shaft end shape (fixed-side) for support units types FK, EK and AK
  8. Recommended shaft end shape (supported-side) for support units types FF, EF, BF and AF
  9. Ballscrew support unit equivalent interchangeable for major manufacturer
  10. Reference of axial load of fixed-side type support units

USEAGE NOTES

  • Do not disassemble the Support Unit of EK, BK, FK and AK.
  • The Bearing of EK, BK, FK and AK are filled-upwith grease.
  • When inserting a screwshaft into Support Unit, take care to prevent peeling the oil-seal lip.
  • After inserting the fixed-side Support Unit, lock the lock nut using the set piece and hexagon socket-head setscrew.
  • Customers special size orders are also available.
T: +44 (0)1386 421005F: +44 (0)1386 422441E: sales@abssac.co.ukW: www.abssac.co.uk
ABSSAC

SUPPORT UNIT BK (fixed-side rectangular type)

Order
Cooling
Model
No.
Surface
Treatment
Applicable
ballscrew
accuracy
grade
BearingSupport Unit BK Black Oxide
Black Oxide
(Application : General case)
BK10_C7BK10Black OxideC77000A P0 
BK10_C5C5
BK10_C3C37000A P5
BK10_C7NElectroless
Nickel Plating
C77000A P0
BK10_C5NC5
BK10_C3NC37000A P5
BK12_C7BK12Black OxideC77001A P0
BK12_C5C5
BK12_C3C37001A P5
BK12_C7NElectroless
Nickel Plating
C77001A P0
BK12_C5NC5
BK12_C3NC37001A P5
BK15_C7BK15Black OxideC77002A P0
BK15_C5C5
BK15_C3C37002A P5Support Unit BK Electroless Nickel Plating
Electroless Nickel Plating
(Application : Clean room)
BK15_C7NElectroless
Nickel Plating
C77002A P0
BK15_C5NC5
BK15_C3NC37002A P5
BK17_C7BK17Black OxideC77203A P0
BK17_C5C5
BK17_C3C37203A P5
BK17_C7NElectroless
Nickel Plating
C77203A P0
BK17_C5NC5
BK17_C3NC37203A P5
BK20_C7BK20Black OxideC77004A P0
BK20_C5C5
BK20_C3C37004A P5
BK20_C7NElectroless
Nickel Plating
C77004A P0
BK20_C5NC5
BK20_C3NC37004A P5

NOTE
1. (Bearings are no Preload for C7 type support units, and Max. Axial clearance is 0.018mm)
2. (Bearings make Preload for C5 type support units, and Axial clearance is 0mm)
3. (All of bearings use Japan’s brand bearings)

T: +44 (0)1386 421005F: +44 (0)1386 422441E: sales@abssac.co.ukW: www.abssac.co.uk
ABSSAC

SUPPORT UNIT BK (fixed-side rectangular type)

Order
Cooling
Model
No.
Surface
Treatment
Applicable
ballscrew
accuracy
grade
BearingSupport Unit BK Black Oxide
Black Oxide
(Application : General case)
BK25_C7 BK25Black OxideC77205A P0 
BK25B_C7 C77205B P0 
BK25_C5 C57205A P0 
BK25B_C5 C57205B P0 
BK25_C3 C37205A P5 
BK25_C7N Electroless
Nickel Plating
C77205A P0 
BK25B_C7N C77205B P0 
BK25_C5N C57205A P0 
BK25B_C5N C57205B P0 
BK25_C3N C37205A P5 
BK30_C7 BK30Black OxideC77206A P0 
BK30B_C7 C77206B P0 
BK30_C5 C57206A P0 
BK30B_C5 C57206B P0 
BK30_C3 C37206A P5 
BK30_C7N Electroless
Nickel Plating
C77206A P0 Support Unit BK Electroless Nickel Plating
Electroless Nickel Plating
(Application : Clean room)
BK30B_C7N C77206B P0 
BK30_C5N C57206A P0 
BK30B_C5N C57206B P0 
BK30_C3N C37206A P5 
BK35_C7 BK35Black OxideC77207B P0
BK35_C5 C5
BK35_C3 C37207B P5
BK35_C7N Electroless
Nickel Plating
C77207B P0
BK35_C5N C5
BK35_C3N C37207B P5
BK40_C7 BK40Black OxideC77208B P0
BK40_C5 C5
BK40_C3 C37208B P5
BK40_C7N Electroless
Nickel Plating
C77208B P0
BK40_C5N C5
BK40_C3N C37208B P5

NOTE
1. (Bearings are no Preload for C7 type support units, and Max. Axial clearance is 0.018mm)
2. (Bearings make Preload for C5 type support units, and Axial clearance is 0mm)
3. (All of bearings use Japan’s brand bearings)

T: +44 (0)1386 421005F: +44 (0)1386 422441E: sales@abssac.co.ukW: www.abssac.co.uk
ABSSAC

SUPPORT UNIT BF (Supported-side rectangular type)

Order
Cooling
Model
No.
Surface
Treatment
Applicable
ballscrew
accuracy
grade
BearingSupport Unit BF Black Oxide
Black Oxide
(Application : General case)
BF10_C7BF10Black OxideC7608ZZ
BF10_C3C3 C5608ZZ
BF10_C7NElectroless
Nickel Plating
C7608DD
BF10_C3NC3 C5608DD
BF12_C7BF12Black OxideC76000ZZ
BF12_C3C3 C56000ZZ
BF12_C7NElectroless
Nickel Plating
C76000DDU
BF12_C3NC3 C56000DDU
BF15_C7BF15Black OxideC76002ZZ
BF15_C3C3 C56002ZZ
BF15_C7NElectroless
Nickel Plating
C76002DDU
BF15_C3NC3 C56002DDU
BF17_C7BF17Black OxideC76203ZZ
BF17_C3C3 C56203ZZ
BF17_C7NElectroless
Nickel Plating
C76203DDUSupport Unit BF Electroless Nickel Plating
Electroless Nickel Plating
(Application : Clean room)
BF17_C3NC3 C56203DDU
BF20_C7BF20Black OxideC76004ZZ
BF20_C3C3 C56004ZZ
BF20_C7NElectroless
Nickel Plating
C76004DDU
BF20_C3NC3 C56004DDU
BF25_C7BF25Black OxideC76205ZZ
BF25_C3C3 C56205ZZ
BF25_C7NElectroless
Nickel Plating
C76205DDU
BF25_C3NC3 C56205DDU
BF30_C7BF30Black OxideC76206ZZ
BF30_C3C3 C56206ZZ
BF30_C7NElectroless
Nickel Plating
C76206DDU
BF30_C3NC3 C56206DDU
BF35_C7BF35Black OxideC76207ZZ

NOTE

  1. (Bearings are no Preload for C7 type support
    units, and Max. Axial clearance is 0.018mm)
  2. (Bearings make Preload for C5 type support
    units, and Axial clearance is 0mm)
  3. (All of bearings use Japan’s brand bearings)
BF35_C3C3 C56207ZZ
BF35_C7NElectroless
Nickel Plating
C76207DDU
BF35_C3NC3 C56207DDU
BF40_C7BF40Black OxideC76208ZZ
BF40_C3C3 C56208ZZ
BF40_C7NElectroless
Nickel Plating
C76208DDU
BF40_C3NC3 C56208DDU
T: +44 (0)1386 421005F: +44 (0)1386 422441E: sales@abssac.co.ukW: www.abssac.co.uk
ABSSAC

SUPPORT UNIT FK (fixed-side round type)

Order
Cooling
Model
No.
Surface
Treatment
Applicable
ballscrew
accuracy
grade
BearingSupport Unit FK Black Oxide
Black Oxide
(Application : General case)
FK05_C7FK05Black OxideC7605
FK05_C7NElectroless
Nickel Plating
C7605
FK06_C7FK06Black OxideC7606
FK06_C5C5706A P0
FK06_C3C3706A P5
FK06_C7NElectroless
Nickel Plating
C7606
FK06_C5NC5706A P0
FK06_C3NC3706A P5
FK08_C7FK08Black OxideC7608
FK08_C5C5708A P0 
FK08_C3C3708A P5 
FK08_C7NElectroless
Nickel Plating
C7608
FK08_C5NC5708A P0 
FK08_C3NC3708A P5 
FK10_C7FK10Black OxideC77000A P0Support Unit FK Electroless Nickel Plating
Electroless Nickel Plating
(Application : Clean room)
FK10_C5C5
FK10_C3C37000A P5
FK10_C7NElectroless
Nickel Plating
C77000A P0
FK10_C5NC5
FK10_C3NC37000A P5
FK12_C7FK12Black OxideC77001A P0
FK12_C5C5
FK12_C3C37001A P5
FK12_C7NElectroless
Nickel Plating
C77001A P0
FK12_C5NC5
FK12_C3NC37001A P5
FK15_C7FK15Black OxideC77002A P0
FK15_C5C5
FK15_C3C37002A P5
FK15_C7NElectroless
Nickel Plating
C77002A P0
FK15_C5NC5
FK15_C3NC37002A P5

NOTE
1. (Bearings are no Preload for C7 type support units, and Max. Axial clearance is 0.018mm)
2. (Bearings make Preload for C5 type support units, and Axial clearance is 0mm)
3. (All of bearings use Japan’s brand bearings)

T: +44 (0)1386 421005F: +44 (0)1386 422441E: sales@abssac.co.ukW: www.abssac.co.uk
ABSSAC

SUPPORT UNIT FK (fixed-side round type)

Order
Cooling
Model
No.
Surface
Treatment
Applicable
ballscrew
accuracy
grade
BearingSupport Unit FK Black Oxide
Black Oxide
(Application : General case)
FK17_C7FK17Black OxideC77203A P0
FK17_C5C57203A P0
FK17_C3C37203A P5
FK17_C7NElectroless
Nickel Plating
C77203A P0
FK17_C5NC57203A P0
FK17_C3NC37203A P5
FK20_C7FK20Black OxideC77204A P0
FK20B_C7C77204B P0
FK20_C5C57204A P0
FK20B_C5C57204B P0
FK20_C3C37204A P5
FK20_C7NElectroless
Nickel Plating
C77204A P0
FK20B_C7NC77204B P0
FK20_C5NC57204A P0Support Unit FK Electroless Nickel Plating
Electroless Nickel Plating
(Application : Clean room)
FK20B_C5NC57204B P0
FK20_C3NC37204A P5
FK25_C7FK25Black OxideC77205A P0
FK25B_C7C77205B P0
FK25_C5C57205A P0
FK25B_C5C57205B P0
FK25_C3C37205A P5
FK25_C7NElectroless
Nickel Plating
C77205A P0
FK25B_C7NC77205B P0
FK25_C5NC57205A P0
FK25B_C5NC57205B P0
FK25_C3NC37205A P5
FK30_C7FK30Black OxideC77206A P0
FK30B_C7C77206B P0
FK30_C5C57206A P0
FK30B_C5C57206B P0
FK30_C3C37206A P5

NOTE

  1. (Bearings are no Preload for C7 type support
    units, and Max. Axial clearance is 0.018mm)
  2. (Bearings make Preload for C5 type support
    units, and Axial clearance is 0mm)
  3. (All of bearings use Japan’s brand bearings)
FK30_C7NElectroless
Nickel Plating
C77206A P0
FK30B_C7NC77206B P0
FK30_C5NC57206A P0
FK30B_C5NC57206B P0
FK30_C3NC37206A P5
T: +44 (0)1386 421005F: +44 (0)1386 422441E: sales@abssac.co.ukW: www.abssac.co.uk
ABSSAC

SUPPORT UNIT FF (Supported-side round type)

Order
Cooling
Model
No.
Surface
Treatment
Applicable
ballscrew
accuracy
grade
BearingSupport Unit FF Black Oxide
Black Oxide
(Application : General case)
FF06_C7FF06Black OxideC7606ZZ
FF06_C3C3 C5606ZZ
FF06_C7NElectroless
Nickel Plating
C7606VV
FF06_C3NC3 C5606VV
FF10_C7FF10Black OxideC7608ZZ
FF10_C3C3 C5608ZZ
FF10_C7NElectroless
Nickel Plating
C7608DD
FF10_C3NC3 C5608DD
FF12_C7FF12Black OxideC76000ZZ
FF12_C3C3 C56000ZZ
FF12_C7NElectroless
Nickel Plating
C76000DDU
FF12_C3NC3 C56000DDU
FF15_C7FF15Black OxideC76002ZZ
FF15_C3C3 C56002ZZ
FF15_C7NElectroless
Nickel Plating
C76002DDU
FF15_C3NC3 C56002DDU
FF17_C7FF17Black OxideC76203ZZSupport Unit FF Electroless Nickel Plating
Electroless Nickel Plating
(Application : Clean room)
FF17_C3C3 C56203ZZ
FF17_C7NElectroless
Nickel Plating
C76203DDU
FF17_C3NC3 C56203DDU
FF20_C7FF20Black OxideC76204ZZ
FF20_C3C3 C56204ZZ
FF20_C7NElectroless
Nickel Plating
C76204DDU
FF20_C3NC3 C56204DDU
FF25_C7FF25Black OxideC76205ZZ
FF25_C3C3 C56205ZZ
FF25_C7NElectroless
Nickel Plating
C76205DDU
FF25_C3NC3 C56205DDU
FF30_C7FF30Black OxideC76206ZZ
FF30_C3C3 C56206ZZ
FF30_C7NElectroless
Nickel Plating
C76206DDU
FF30_C3NC3 C56206DDU

NOTE
1. (Bearings are no Preload for C7 type support units, and Max. Axial clearance is 0.018mm)
2. (Bearings make Preload for C5 type support units, and Axial clearance is 0mm)
3. (All of bearings use Japan’s brand bearings)

T: +44 (0)1386 421005F: +44 (0)1386 422441E: sales@abssac.co.ukW: www.abssac.co.uk
ABSSAC

TYPE OF SUPPORT UNITS AND APPLICABLE BALL SCREW DIAMETERS

(mm) Fixed-side support unit ID (mm)Fixed-side support unit applicable modelSupported-side support unit ID (mm)Supported-side support unit applicable modelApplicable Ball Screw OD (mm)
5EK05--∅6
FK05
6EK066EF06∅8
FK06FF06
8EK086EF08∅10
FK08FF06
10EK108EF10∅10, ∅12, ∅14
FK10FF10
BK10BF10
AK10AF10
12EK1210EF12∅14, ∅15, ∅16
FK12FF12
BK12BF12
AK12AF12
15EK1515EF15∅20
FK15FF15
BK15BF15
AK15AF15
17BK1717BF17∅20, ∅25
FK17FF17
20EK2020EF20∅25, ∅28
FK20FF20
BK20BF20
AK20AF20
25FK2525FF25∅32, ∅36
BK25BF25
30FK3030FF30∅40, ∅45
BK30BF30
35BK3535BF35∅45
40BK4040BF40∅50
T: +44 (0)1386 421005F: +44 (0)1386 422441E: sales@abssac.co.ukW: www.abssac.co.uk
ABSSAC

RECOMMENDED SHAFT END SHAPE (Fixed-side) FOR BK SUPPORT UNITS TYPES

Recommended shaft end shape diagram, BK

Units : mm

Support unit model No.Ballscrew shaft ODShaft support portion OD Metric screw threadMetric screw thread
Type BKdDBEFMSC
BK1012/14/1510-0.00583615M10x1165.5
-0.012
BK1214/15/1612-0.005103615M12x1145.5
-0.012
BK1518/2015-0.005124020M15x1126
-0.014
BK1720/2517-0.005155323M17x1177
-0.014
BK2025/2820-0.005175325M20x1158
-0.014
BK2532/3625-0.005206530M25x1.5189
-0.014
BK3036/4030-0.005257238M30x1.5259
-0.015
BK354535-0.005308145M35x1.52812
-0.015
BK405040-0.005359350M40x1.53515
-0.015
T: +44 (0)1386 421005F: +44 (0)1386 422441E: sales@abssac.co.ukW: www.abssac.co.uk
ABSSAC

RECOMMENDED SHAFT END SHAPE (Fixed-side)
FOR SUPPORT UNITS TYPES FK, EK AND AK

Recommended shaft end shape diagram, FK, EK AND AK

Units : mm

Support unit model No.Ballscrew shaft ODShaft support portion OD Metric screw threadMetric screw thread
Type FKType EKType AKdDBEFMSC
FK05EK05-85-0.0054256M5x0.573.5
-0.012
FK06EK06-86-0.0054288M6x0.7585
-0.012
FK08EK08-10/128-0.0056329M8x1105.5
-0.012
FK10EK10AK1012/14/1510-0.00583615M10x1115.5
-0.012
FK12EK12AK1214/15/1612-0.005103615M12x1115.5
-0.012
FK15EK15AK1518/2015-0.005124720M15x11310
-0.014
FK17--20/2517-0.005155823M17x11510
-0.014
FK20EK20AK2025/28/3020-0.005176225M20x11711
-0.014
FK25--30/32/3625-0.005207630M25x1.52015
-0.014
FK30--36/4030-0.005257238M30x1.5259
-0.015
T: +44 (0)1386 421005F: +44 (0)1386 422441E: sales@abssac.co.ukW: www.abssac.co.uk
ABSSAC

RECOMMENDED SHAFT END SHAPE (Supported-side)
FOR SUPPORT UNITS TYPES FF, EF, BF AND AF

Recommended shaft end shape diagram, FF, EF, BF AND AF

Units : mm

Support unit model No.Ballscrew shaft ODShaft support portion OD 
Type FFType EFType BFType AFdDEBFG
FF06EF06--86-0.00595.76.80.8
-0.012
-EF08--106-0.00595.76.80.8
-0.012
FF10EF10BF10AF1012/14/158-0.005107.67.90.9
-0.012
FF12EF12BF12AF1214/15/1610-0.005119.69.151.15
-0.012
FF15EF15BF15AF1518/2015-0.0051314.310.151.15
-0.014
FF17-BF17-20/2517-0.0051616.213.151.15
-0.014
FF20EF20(BF20) NoteAF2025/28/3020-0.00519 (16)1915.35 (13.35)1.35
-0.014
FF25-BF25-30/32/3625-0.0052023.916.351.35
-0.014
FF30-BF30-36/4030-0.0052128.617.751.75
-0.015
--BF35-40/4535-0.005223318.751.75
-0.015
--BF40-5040-0.005233819.751.95
-0.015
T: +44 (0)1386 421005F: +44 (0)1386 422441E: sales@abssac.co.ukW: www.abssac.co.uk
ABSSAC

BALLSCREW SUPPORT UNIT EQUIVALENT INTERCHANGEABLE FOR MAJOR MANUFACTURER

SYK & THK SYK & THKKURODANSK SYK & THKKURODANSK
BK10EK05--FK05--
BK12EK06BUK-6WBK06-01AFK06-WBK06-11
BK15EK08BUK-8FWBK08-01AFK08BUM-8WBK08-11
BK17EK10--FK10BUM-10WBK10-11
BK20EK12--FK12BUM-12WBK12-11
BK25EK15--FK15BUM-15WBK15-11
BK30EK20--FK17--
BK35 FK20BUM-20WBK20-11
BK40EF06--FK25BUM-25WBK25-11
 EF08BUK-6SWBK08S-01FK30--
BF10EF10-- 
BF12EF12--FF06--
BF15EF15--FF10--
BF17EF20--FF12--
BF20 FF15--
BF25SYK & THKKURODANSKFF17--
BF30AK10BUK-10FWBK10-01AFF20--
BF35AK12BUK-12FWBK12-01AFF25--
BF40AK15BUK-15FWBK15-01AFF30--
 BK17-WBK17-01A 
AK20BUK-20FWBK20-01A
-BUK-25FWBK25-01A
 
AF10BUK-8SWBK10S-01
AF12BUK-10SWBK12S-01
AF15BUK-15SWBK15S-01
BF17-WBK17S-01
AF20BUK-20SWBK20S-01
-BUK-25SWBK25S-01
T: +44 (0)1386 421005F: +44 (0)1386 422441E: sales@abssac.co.ukW: www.abssac.co.uk
ABSSAC

REFERENCE OF AXIAL LOAD OF FIXED-SIDE TYPE SUPPORT UNITS

Model No.BearingStatic Load (Kgf)Allowable Axial Load (Kgf)Limiting RPM (RPM)
FK06EK0670610653 
FK08EK0870814874 
BK10AK107000A26613316800
FK10EK10
BK12AK127001A30515315400
FK12EK12
BK15AK157002A35017513300
FK15EK15
BK17FK177203A61030511200
7203B5653637700
BK20 7004A67033510500
 AK207204A8454239100
FK20EK207204B7805016650
BK25FK257205A10505258400
7205B9606175950
BK30FK307206A15107557000
7206B13808874970
BK35 7207B187012024200
BK40 7208B234015043710
T: +44 (0)1386 421005F: +44 (0)1386 422441E: sales@abssac.co.ukW: www.abssac.co.uk
ABSSAC

LINEAR GUIDES AND RAILS

At Abssac, we concentrate on the flanged mount and square mount versions of linear guides. These items are in stock and have proven to be the best linear guide solution when teamed up with any of our ball and lead screw products. Dimensional data for these models can be accessed by the buttons above but we do encourage you to contact our knowledgeable sales team who can help you with the right selection..

By primarily using a four ball path design, within the slide, allows the guides to accept up to 30% more load and up to 30% stiffer than similar products in the market. An added bonus is that the ball bearings are retained within the housing so that should the guides come off the end of the rail, you will not be faced with all the ball bearings falling out. From experience, we know that this advantage can also significantly aid in the final assembly.

Linear Guides and Rails Diagram 1Typical Guide applications include:

  • Grinders
  • NC Lathes
  • Machining centres
  • Precision milling
  • Automation technology
  • Transportation technology
  • Measuring applications
  • Machines that require a high level of positional accuracy
  • Ideal for usewith our Transport ball screwranges

We also offer the advantage of supplying lightly pre-loaded heavy duty or extra heavy duty guide models to suit individual applications. When compared to other slide mechanisms such as dovetail slides, efficiency is far greater. The linear guides can carry loads in both horizontal and vertical directions. Please also note that the rails are pre drilled for ease of fitting and can be delivered cut to your desired length at no extra cost. Please note that all guides come with dust proofing seals at each end.

Available rail widths from 15mm to 65mm cater from the lightest to the heaviest load. If your application requires an accurate support and guide, our ex-stock range of linear rails may be the answer to your design challenges. Rails can be supplied from 100mm to 4000mm in length and in some cases can be attached to the application from beneath.

 

Typical Performance Data
HG Series 25, 30, 35NormalHighPrecisionSuper PrecisionUltra Precision
Accuracy Class+/- 0.1mm+/- 0.04mm+/- 0+/- 0+/- 0
Height Tolerance H1+/- 0.1mm+/- 0.04mm+ 0 /- 0.04mm+ 0 / 0.02mm+ 0 / 0.01mm
Width Tolerance N1+/- 0.1mm+/- 0.04mm+ 0 /- 0.04mm+ 0 / 0.02mm+ 0 / 0.01mm
T: +44 (0)1386 421005F: +44 (0)1386 422441E: sales@abssac.co.ukW: www.abssac.co.uk
ABSSAC

LINEAR GUIDES AND RAILS - DIMENSIONS

Linear Guides and Rails Diagram 2

Model No.Dimensions of Assembly (mm) Dimensions of Block (mm) Dimensions of Rail (mm)Mounting Bolt for RailBasic Dynamic Load RatingBasic Static Load RatingStatic Rated MomentWeight
HH1NWBB1CL1LK1K2GMxLTH2H3WRHRDhdPE(mm)C (kN)CO (kN)MR kN-mMP kN-mMY kN-mBlock kgRail kg/m
HGH 15CA244.39.5342642639.461.4104.855.3M4x5 67.957.715157.55.34.56020M4x16 11.3816.970.120.100.100.181.45
HGH 20CA 304.612443263650.577.512.2512M5x6 8672017.59.58.566020M5x16 17.7527.760.270.200.200.302.21
HGH 20HA 5065.292.212.621.1835.900.350.350.350.39
HGH 25CA 405.512.548356.535588416.812M6x8 81013232211976020M6x20 26.4836.490.420.330.330.513.21
HGH 25HA 5078.6104.619.632.7549.440.560.570.570.69
HGH 30CA 45616604010407097.420.2512M8x10 8.59.513.82826141298020M8x25 38.7452.190.660.530.530.884.47
HGH 30HA 6093120.421.7547.2769.160.880.920.921.16
HGH 35CA 557.5187050105080112.420.612M8x1210.21619.63429141298020M8x25 49.5269.161.160.810.811.456.30
HGH 35HA 72105.8138.222.560.2191.631.541.401.401.92
HGH 45CA 709.520.58660136097139.42310 12.9M10x17 1618.530.5453820171410522.5M12x35 77.57102.711.981.551.552.7310.41
HGH 45HA 80128.8171.228.994.54136.462.632.682.683.61
HGH 55CA 801323.51007512.575117.7166.727.3511 12.9M12x1817.52229534423201612030M14x45 114.44148.333.692.642.644.1715.08
HGH 55HA 95155.8204.836.4139.35196.204.884.574.575.49
HGH 65CA 901531.5126762570144.2200.243.114 12.9M16x20 251515635326221815035M16x50 163.63215.336.654.274.277.0021.18
HGH 65HA 120203.6259.647.8208.36303.139.387.387.389.82

Note: 1kgf = 9.81N

T: +44 (0)1386 421005F: +44 (0)1386 422441E: sales@abssac.co.ukW: www.abssac.co.uk
ABSSAC

LINEAR GUIDES AND RAILS - DIMENSIONS

Linear Guides and Rails Diagram 3

Model No.Dimensions of Assembly (mm) Dimensions of Block (mm) Dimensions of Rail (mm)Mounting Bolt for RailBasic Dynamic Load RatingBasic Static Load RatingStatic Rated MomentWeight
HH1NWBB1CL1LK1K2GMxLTH2H3WRHRDhdPE(mm)C (kN)CO (kN)MR kN-mMP kN-mMY kN-mBlock kgRail kg/m
HGH 15CA244.31647384.53039.461.484.855.3M5 67.957.715157.55.34.56020M4x16 11.3816.970.120.100.100.171.45
HGH 20CA 304.621.5635354050.577.510.2512M6 8672017.59.58.566020M5x16 17.7527.760.270.200.200.402.21
HGH 20HA 65.292.217.621.1835.900.350.350.350.52
HGH 25CA 365.523.570576.545588411.812M8 869232211976020M6x20 26.4836.490.420.330.330.593.21
HGH 25HA 78.6104.622.132.7549.440.560.570.570.80
HGH 30CA 4263190729527097.414.2512M10 8.56.510.82826141298020M8x25 38.7452.190.660.530.531.094.47
HGH 30HA 93120.425.7547.2769.160.880.920.921.44
HGH 35CA 487.5331008296280112.414.612M1010.1912.63429141298020M8x25 49.5269.161.160.810.811.566.3
HGH 35HA 105.8138.227.560.2191.631.541.401.402.06
HGH 45CA 609.537.5120100108097139.41310 12.9M12 15.18.520.5453820171410522.5M12x35 77.57102.711.981.551.552.7910.41
HGH 45HA 128.8171.228.994.54136.462.632.682.683.69
HGH 55CA 701343.51401161295117.7166.717.3511 12.9M14 17.51219534423201612030M14x45 114.44148.333.692.642.644.5215.08
HGH 55HA 155.8204.836.4139.35196.204.884.574.575.96
HGH 65CA 901553.517014214110144.2200.223.114 12.9M16 251515635326221815035M16x50 163.63215.336.654.274.279.1721.18
HGH 65HA 203.6259.652.8208.36303.139.387.387.3812.89

Note: 1kgf = 9.81N

T: +44 (0)1386 421005F: +44 (0)1386 422441E: sales@abssac.co.ukW: www.abssac.co.uk
ABSSAC

BLUE BRONZE NUT GREASE

LONG LIFEMULTI-PURPOSE GREASE
Appearance
Smooth, blue grease
Worked penetration
290-320
Base type
Severely refined mineral oil
Thickener
Multi-complex soap technology
Temperature range
-30°C to 150°C
Base fluid viscosity at 40°C
180 cSt
Base fluid viscosity at 100°C
17 cSt
Shell 4 ball (IP 239)(ASTMD2596) Weld load
>800 kg
Mean hertz load
120 kg
Timken ‘OK’ Load
60lb
(IP 326)(ASTMD2509) Copper Corrosion test
1 a
(IP 112)(ASTMD130) Corrosion test
- Emcor (IP 220)
0:0
Water Washout Test (IP 215)(ASTMD1264)
2%
STORAGE

Storage temperature should be controlled to between 1 and 40°C.
Designed for the effective lubrication and protection of all types of Abssac bronze nuts.

FEATURES

Temperature range -30°C to 150°C.
Revolutionary multi-complex soap technology.
Greatly extended lubrication intervals typically 3 times longer than conventional soap thickened greases.
Good corrosion resistance.
Blue in colour for high visibility.

DIRECTIONS FOR USE

Apply manually.
Compatible with other soap thickened greases.
However, for best results, the previous lubricant should be removed prior to application.

 
Please call us for a quotation.

T: +44 (0)1386 421005F: +44 (0)1386 422441E: sales@abssac.co.ukW: www.abssac.co.uk
ABSSAC

COPYRIGHT

"ABSSAC" is a registered trade mark 2375859

All rights are reserved.

The use of this catalogue is made available to you by Abssac Limited. The exclusive right to control the use of the copyright and trademarks on this site is controlled by Abssac Limited. These may not be copied, reproduced, published, distributed, modified or otherwise used in any form including electronic copying without the express permission of Abssac Limited. Abssac Limited has made all reasonable endeavor to ensure that the material on this site is accurate. You agree that Abssac Limited, nor any other person involved in creating or providing this catalogue shall be liable for any indirect or consequential damage arising from the use of any information contained in this catalogue.

The information contained in this catalogue is provided 'as is' without warranty of any kind, either expressed or implied. Abssac Limited assumes no responsibility for errors or omissions in this catalogue or other documents which are reference by or linked to this catalogue. This catalogue could include technical or other inaccuracies including typographical errors. Updates and changes are periodically added to the information herein; these changes will be incorporated in new editions of this catalogue. Abssac Limited may make improvements and/or changes in the product(s) or service(s) described in this publication at any time. You agree that the above terms represent the entire basis of the agreement between us, upon which you are permitted to enter this site and you agree that all relations between us are subject to the Law of England and Wales.

T: +44 (0)1386 421005F: +44 (0)1386 422441E: sales@abssac.co.ukW: www.abssac.co.uk
ABSSAC

STANDARD CONDITIONS OF SALE

1.
Interpretation
1.1
In these Conditions:
"Buyer" means the person who accepts a quotation of the Seller for the sale of the Goods or whose order for the Goods is accepted by the Seller
"Goods" means the goods (including any instalment of the goods or any parts for them) which the Seller is to supply in accordance with these Conditions
"Seller" means ABSSAC LIMITED a company incorporated in England and whose registered number is 1677177.
"Conditions" means the standard terms and conditions of sale set out in this document and (unless the context otherwise requires) includes any special terms and conditions agreed in writing between the Buyer and the Seller
"Contract" means the Contract for the purchase and sale of the Goods
"Writing" includes telex, cable, facsimile transmission, E-Mail and comparable means of communication
1.2
Any reference in these Conditions to any provision of a statute shall be construed as a reference to that provision as amended, re-enacted or extended at the relevant time
1.3
The headings in these Conditions are for convenience only and shall not affect their interpretation
2.
Basis of the sale
2.1
Subject to Condition 3 below, the Seller shall sell and the Buyer shall purchase the Goods in accordance with any oral or written order of the Buyer which is accepted by the Seller, or any written quotation of the Seller which is accepted by the Buyer, subject to these Conditions which shall govern the Contract to the exclusion of any other terms and conditions subject to which any such quotation is accepted or purported to be accepted, or any such order is made or purported to be made, by the Buyer
2.2
No variation, addition or waiver of any of these Conditions shall be effective unless it is in Writing and signed by a duly authorised representative of both the Seller and the Buyer
2.3
The Seller's employees or agents are not authorised to make any representations concerning the Goods unless confirmed by the Seller in Writing. In entering into the Contract the Buyer acknowledges that it does not rely on any such representations which are not so confirmed
2.4
Samples supplied and advice or recommendations as to storage, application or use of the Goods given by the Seller or its employees or agents to the Buyer or its employees or agents are for guidance only and any such matter which is not confirmed in Writing by the Seller is followed or acted upon entirely at the Buyer's own risk and accordingly the Seller shall not be liable for any such advice or recommendation which is not so confirmed then the Buyer should depend on their accuracy only after obtaining specific written confirmation to that effect from the Seller
2.5
Any typographical, clerical or other error or omission in any sales literature, quotation, price list, acceptance of offer, invoice or other document or information issued by the Seller shall be subject to correction without any liability on the part of the Seller
3.
Quotations and acceptance of orders
3.1
Quotations issued by the Seller are invitations to order Goods from the Seller. No Contract will exist until the Seller has accepted the Buyer's order in accordance with condition 3.3.
3.2
Subject to condition 3.1 the price in the quotation should be valid for a period of 30 days from the date of the quotation unless otherwise advised by the Seller in Writing
3.3
The Seller shall not be bound by any order submitted by the Buyer unless and until confirmed by the Seller in Writing
3.4
Scheduled call off purchase orders made by the Buyer with the Seller are for twelve month periods only, or until 19th December ofthat year, depending which comes first unless otherwise agreed in Writing by the Seller
3.5
The Buyer is committed to purchasing any remaining amount of products on his purchase order if the Buyer decides to cancel the order mid schedule unless otherwise agreed in Writing by the Seller
3.6
No order which has been accepted by the Seller may be cancelled by the Buyer except with the agreement in Writing of the Seller on the terms that the Buyer shall indemnify the Seller in full against all loss (including loss of profit), costs (including the costs of all labour and materials used), damages, charges and expenses incurred by the Seller as a result of cancellation.
3.7
Compliance with United States Export Regulations
It is Abssac's policy to request, if applicable, the end use and end user details in all sales and repairs of USA origin products and in all transfers of technical data or software to ensure compliance with applicable u.s. export control laws and regulations. Because the products you are purchasing may be used outside of the United States, we will need confirmation of the following from the (buyer). It is on the onus of the buyer to ensure that Abssac is informed of the following information.
1.1
(Buyer) will not export or re-export any USA origin products, technology or software to Cuba, Iran, Iraq, Libya, North Korea, Sudan, or Syria, unless otherwise authorized by the United States Govern ment.
2.1
(Buyer) will not sell, transfer, export or re-export any USA origin products for use in activities which involve the development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor use USA origin products in any facilities which are engaged in activities relating to such weapons.
3.1
(Buyer) acknowledge that u.s. law prohibits the sale, transfer, export or re-export or other participation in any export transaction involving USA origin products with individuals or companies listed in the u.s. Commerce Department's Table of Denial Orders, the u.s. Treasury Department's list of Specially Designated Nationals or the u.s. Department of State's list of individuals debarred from receiving Munitions List items.
4.1
(Buyer) will abide by all applicable u.s. export control laws and regulations for any products purchased from USA origin products, software or technology.
5.1
(Buyer) agree that the export control requirements in No. 1-4 above shall survive the completion, early termination, cancellation or expiration of the applicable purchase order, agreement or contract.
4.
Specifications
4.1
The Buyer shall be responsible to the Seller for ensuring the accuracy of the terms of any order (including any applicable specification) submitted by the Buyer, and for giving the Seller any necessary information relating to the Goods within a sufficient time to enable the Seller to perform the Contract in accordance with its terms
4.2
The quantity, quality and description of any specification for the Goods shall be those set out in the Seller's quotation (if accepted by the Buyer) or the Buyer's order (if accepted by the Seller)
4.3
If Goods are supplied in accordance with the Buyer's specifications the Buyer shall be solely responsible for the specifications and ensuring that they are accurate
4.4
If any technical calculations are made by the Seller using information supplied by the Buyer the Buyer accepts that they are responsible for supplying accurate technical information and accordingly the Seller is not liable in respect of calculations based on incorrect information given
4.5
If Goods are to be manufactured or any process is to be applied to the Goods by the Seller in accordance with a specification or request submitted by the Buyer or should any change be made to the Goods at the request of the Buyer the Buyer shall indemnify the Seller against all loss damages costs and expenses awarded against or incurred by the Seller in connection with or paid or agreed to be paid by the Seller in settlement of any claims for infringement of any patent, copy right, design, trade mark or other industrial or intellectual property rights of any person which results from the Seller's use of the Buyers specification
T: +44 (0)1386 421005F: +44 (0)1386 422441E: sales@abssac.co.ukW: www.abssac.co.uk
ABSSAC
4.6
The Seller reserves the rights to make any changes in the specification of the Goods which are required to conform with any applicable statutory or EC requirements or, where the Goods are to be supplied to the Seller's specification, which do not materially affect their quality or performance
4.7
At all times the buyer has the responsibility to adequately guard and maintain the product supplied in accordance with relevant operation manuals, service factors and health and safety legislation applicable for any product supplied by ABSSAC Limited.
4.8
The seller (Abssac Limited) shall not in any event be liable for any consequential damages, secondary charges, expenses for installing or disconnecting, or losses or injuries to persons or property resulting from any alleged defect in the product or any use of the product, and lor in manner that exceeds its design, duty cycle and or ability.
4.9
It remains the responsibility of the buyer to test any samples or other products that the seller will provide for fatigue, stress and general ability in the application. All products that the seller provides and are used in both real and test situations are considered by Abssac Ltd to have been thoroughly tested to meet and exceed the anticipated life and duty requirement of the product in its application by the buyer. It remains the responsibility of the buyerto give all technical information to the seller and all buyers are responsible for meeting health and safety measures and adequately guarding users and all associated parties against all and any possible failures in line with the health and safety requirements.
Other Where recommended guidelines of serviceable or replaceable parts and maintenance/inspection requirements are exceeded or ignored by the user and/or buyer, no warranty or other claim can or will exist. Where minimum or maximum values/sizes/limits/dimensions/fitting instructions and technical data of parts are ignored/abused/extended/not applied/not actioned or used in excess ofthe design or standard parameters ofthe product by the user and/or buyer then no warranty claim or other claim can exist.
No warranty or other claim can exist or be made by the user or buyer or other to the seller or its agent or other for any part used in motor sport, military or aviation. No warranty is given to this type of application.
All or any secondary or further processes/disassembly/machining/ heating/drying/coating or any other additional process the originally supplied product or associated part/product after dispatch from the seller or its agent voids any warranty claim or other claim.
It remains the responsibility of the buyer or user to advise us the seller of any and all certification/test/traceable certification requirement.
Conversations may be recorded as part of our ongoing customer service program.
5.
Packaging
5.1
Packaging for the Goods shall be at the discretion of the Seller which has the right to pack the Goods in such a manner and with such materials and in such quantities as in his absolute discretion thinks fit unless detailed packaging instructions are received from the Buyer prior to agreeing a price for the Goods which the Seller agrees to in Writing
6.
Price of the Goods
6.1
Price of the Goods shall be the Seller's quoted price or, where no price has been quoted (or a quoted price is no longer valid) the price listed in the Seller's published price list current at the date of acceptance of this order. Where the Goods are supplied for export from the United Kingdom, the Seller's published export price list shall apply. All prices quoted are valid for 30 days only or until earlier acceptance by the Buyer, after which time they may be altered by the Seller without given giving written notice to the Buyer
6.2
The price is exclusive of any applicable value added tax, which the Buyer shall be additionally liable to pay to the Seller
6.3
All prices stated shall be subject to variation at the sole discretion of the Seller at any time without prior notice and the Seller shall notify the Buyer of any variation before delivery of the Goods
7.
Payment
7.1
Liability for payment for the Goods supplied to customers who have a trading account with the Seller shall arise on delivery and payment in cash is due 30 days from the date of the invoice or as otherwise specifically agreed in Writing by the Seller. Payment shall be due and the company shall be entitled to sue for the price whether or not property in the Goods has passed by virtue of condition 10 and not withstanding the delivery may not have taken place as a result of the Buyer's wrongful or refusal to accept delivery. The time of payment of the price shall be of the essence of the Contract
7.2
Liability for payment forthe Goods supplied on a proforma invoice basis for customers who do not have a trading account with the Seller shall be prior to delivery of the Goods. The ti me of payment of the price shall be of the essence of the Contract. It is the Buyer's responsibility to give written notice to the Seller of any payment under proforma invoice arrangements
7.3
Sums paid after the due date shall pay interest until the day payment is received at the rate of 5% per annum above the base rate from time to time of National Westminster Bank Pic occurring from day to day from the date of delivery until the date of payment in full
7.4
If the recovery of sums outstanding from the Buyer is passed to a debt collection agency the Buyer shall pay the Seller's costs in instructing the said debt collection agency and all ancillary legal costs
7.5
Without prejudice to any other rights or remedies ofthe Seller any in default of the Buyer in making payment on the due date shall entitle the Seller to suspend deliveries under the Contract or any other Contract so long as the default continues and break the Contract as repudiated by the Buyer and determined if the Buyer has not within 14 days of receiving written notice from the Seller paid all sums due to the Seller.
8.
Delivery
8.1
Delivery shall take place when the Goods are unloaded at or delivered to the Buyer's premises or other delivery location agreed between the Seller and the Buyer exceptthat if the Buyer collects or arranges collection of the Goods from the Seller's premises, or nominates a carrier for the Goods delivery shall take place when the Goods are loaded on the collection or carriers vehicle
8.2
Any dates quoted for delivery of the Goods are approximate only and the Seller will not be liable for any delay in delivery of the Goods however so caused. Time for delivery shall not be of the essence of the Contract unless previously agreed by the Seller in Writing. The Goods may be delivered by the Seller in advance of the quoted delivery date upon giving responsible notice to the Buyer
8.3
The Buyer shall accept immediate delivery or arrange to collect the Goods or arrange suitable storage, failing which the company may either:
8.3.1
effect delivery by whatever means they think most appropriate; or
8.3.2
arrange storage atthe Buyer's risk and expense pending delivery; or
8.3.3
re-sell or otherwise dispose ofthe Goods without prejudice to any other rights the Seller may have against the Buyer for breach of Contract or otherwise
8.4
Where the agreement provides for delivery by instalments each delivery shall constitute a separate Contract and failure by the Seller to deliver any one or more of the instalments in accordance with these Conditions or any claim by the Buyer in respect of any one or more instalments shall not entitle the Buyer to treat the Contract as a whole as repudiated
8.5
The Buyershall not be entitled to reject the Goods by reason only of short delivery
T: +44 (0)1386 421005F: +44 (0)1386 422441E: sales@abssac.co.ukW: www.abssac.co.uk
ABSSAC
8.6
The quantity of the Goods delivered under the Contract shall be recorded by the Seller upon dispatch from the Seller's factory or warehouse and the Seller's records shall be accepted by the Buyer as conclusive evidence of the quantity delivered.
8.7
It is the Buyer's responsibilityto notify the seller if Goods have not been received by the Buyer within seven days of the date of receipt of the Seller's invoice, therefore, if no notification is made the Buyer shall be deemed to have received the Goods.
8.8
If the Seller fails to deliver the Goods (or any instalment) for any reason other then any cause beyond the Seller's reasonable control or the Buyer's fault, and the Seller is accordingly liable to the Buyer, the Seller's liability shall be limited to the excess (if any) of the cost to the Buyer (in the cheapest available market) of similar Goods to replace those not delivered over the price of the Goods. The seller is under no obligation or liability in respect of failure to complete or delay or failure to deliver the goods comprised in any order or contract caused directly or indirectly by act of war or terrorism, strikes, lockouts, labour troubles, breakdowns, delays in transport, accidents, delay in obtaining material, fire, government prohibition, delivery of necessary fuel requirements, any and all problems or other restrictions relating to design or other manufacturing difficulties that arise during an order.
8.9
If the Buyer fails to take delivery of the Goods or fails to give the Seller adequate delivery instructions at the time stated for delivery (otherwise than by reason of any cause beyond the Buyer's reasonable control or by reason of the Seller's fault) then, with out prejudice to any other right or remedy available to the Seller, the Seller may:
8.9.1
store the Goods until actual delivery and charge the Buyer for the reasonable costs (including insurance) of storage;
or
8.9.2
sell the Goods at the best price readily obtainable and (after deducting all reasonable storage and selling expenses) account to the Buyer for the excess over the price under the Contract or charge the Buyer for any shortfall below the price under the Contract
9.
Examinations and claims
9.1
The Buyer shall upon delivery examine the Goods and shall promptly (but in any event within seven working days of delivery) notify in Writing the Seller and the carrier, where relevant, of any apparent damage defect or shortage.
9.2
The Buyer shall comply with the carriers rules, regulations and requirements so as, when appropriate, to the Seller to make a claim against the carrier in respect of any damage or loss in transit.
9.3
Claims in respect of damage defects or shortage not apparent on examination and under clause 9.1 must be notified in Writing to the Seller within 7 days of the date of delivery
9.4
Notification under clauses 9.1 to 9.3 above shall be first made by telephone then by notice in Writing delivered by facsimile transmission or by first class recorded delivery mail and addressed to Abssac Limited Units 19/20 Bond Industrial Estate Wickhamford Evesham Worcs WRll 7RH.
9.5
In default of such notification the seller shall be deemed conclusively to have properly preformed its obligations under the Contract.
10.
Property and risk
10.1
All risk including that of dam age to or loss of the Goods shall pass to the Buyer:
10.1.1
at the time when the Seller notifies the Buyer that the Goods are available for collection the case of Goods to be supplied at the Seller's premises
or
10.1.2
at the time of delivery but prior to unloading or if the Buyer wrongfully fails to take delivery of the Goods at the time when the Seller has tendered to delivery of the Goods in the case of Goods to be supplied otherwise than at the Seller's premises
or;
10.1.3
at the time of delivery of the Goods to a carrier for delivery to the Buyer in the case of Goods to be supplied in a manner otherwise than as set out in Conditions 10.1.1 or 10.1.2 above
10.2
The Buyer shall fully insure the Goods against all risks from the times stipulated forthe passing of risk in condition 10.1 above up to the time when the proprietary rights in such Goods pass to the Buyer
10.3
Property (both legal and beneficial) in the Goods shall remain in the company until all sums owing to the Seller whether under the Contract or any other Contract at any time between the Seller and the Buyer made prior to the date of the Contract ("the Indebtedness) shall have been paid in full, until such time the Buyer shall hold the Goods as bailee for the Seller
10.4
The Buyer shall not be entitled to pledge or in any way charge by way of security for any indebtedness any of the Goods which remain the property of the Seller, but if the Buyer does so all moneys owing by the Buyer to the Seller shall (without prejudice to any other right or remedy of the Seller) forthwith become due and payable
10.5
The Buyer until otherwise notified by the Seller or on the happening of any of the event specified in Condition 10.7 ("the Events") may in the ordinary course of business sell the Goods and pass property in them ("the Re-Sale") subject to the stipulations ("the Stipulations") imposed in Condition 1 0.5
10.6
The Stipulations are that until the Indebtedness has been fully discharged;
10.6.1
the Goods shall not be converted into any other product or mixed with any other Goods to make another product ("the New Product") nor will the Buyer sell the New Product and property in it ("the Sale") but if the Buyer in breach of the above provision does convert or mix the Goods property in the New Product shall atthe earliest moment that such vesting is possible, vest and remain in the Seller whether or not property in the Goods is at the moment extinguished
10.6.2
the Re-Sale shall be for the account of the Seller and, unless the Seller by written notice requires the paymentto it of the proceeds ofthe Re-Sale ("the Proceeds") to the extent of the Indebtedness, in which case the Buyer shall forthwith on receipt of such notice or as soon as thereafter as it shall receive the Proceeds makes its payment, the Buyer shall retain the Proceeds in a separate bank accountto the order of the Seller and not mix them with any other monies
10.6.3
in the event of a breach by the Buyer of its obligations under additions 10.6.1 the Seller shall have the right to trace the Proceeds in to any other moneys which may have been mixed and the Buyer shall indemnify the Seller on a full indemnity basis against loss, damage, costs or expenses incurred in such tracing
10.6.4
until the Re-Sale the Seller has have the right to repossess the Goods or take possession of the New Product at any time and for this purpose shall have the right to enter on to any premises or land in the ownership or possession of the Buyer and remove the Goods and/or the New Product not withstanding that they are affixed to such premises or land and the Buyer shall indemnifythe Seller on a full indemnity basis against all loss, damage, costs or expenses so arising including loss, damage, costs or expenses in respect of third party claims. Such taking of possession re delivery shall be without prejudice in the obligation of the Buyer to purchase Goods
10.6.5
the Goods and the New Product shall until their Re-Sale or Sale be stored separately, protected and insured and identified and clearly marked as the Seller's property
10.7
The Events are;
10.7.1
The giving of any notice to the Buyer that a receiver, manager, administrative receiver, supervisor, nominee or administrator is to be or has been appointed over any of the property or assets of the Buyer or that a petition to wind up the Buyer is to be or has been presented or that an application for an administration order is to be or has been made or any notice of a resolution to wind up the Buyer (say for the purposes of bona fide reconstruction or amalgamation)
10.7.2
A decision by the Buyer that the Buyer intends to make any arrangement or composition with its creditors generally.
10.7.3
Where the Buyer pursuant to section 123 or 268 of the Insolvency Act 1986 appears to be unable to pay a debt or appears to have no reasonable prospects of being able to pay a debt
T: +44 (0)1386 421005F: +44 (0)1386 422441E: sales@abssac.co.ukW: www.abssac.co.uk
ABSSAC
10.7.4
any distress or execution levied as threatened to be levied on any property or assets of the Buyer
10.7.5
the inability of the Buyer to pay its debts as they fall due
10.7.6
on receipt of notification from the company under Condition 10.5 or on the happening of any of the Events the Buyer shall immediately deliver the Goods and the New Product property in which the Product is reserved to or is vested in the Seller to such address as the Seller shall specify in default of which or in the alternative, the Seller shall have the right to enter on any premises or land in the ownership or possession of the Buyer in order to recover the Goods and the New Product and the Buyer shall indemnify the Seller on a full indemnity basis against all loss, damage, costs or expenses as arising including loss, damage, cost or expenses in respect of third party claims
11.
Breach by or insolvency by the Buyer
11.1
if the Buyer shall not comply with any of its obligations to the Seller or upon the occurrence of any of the Events referred to in clause 10.7 the Seller shall have the right forthwith to terminate the Contract but without affecting any other claim right or remedy of the Seller against the Buyer and without any liabilityto the Buyer, and if the Goods have been delivered but not paid for the price shall become immediately due and payable notwithstanding any previous agreement or arrangement to the contrary
12.
Export Terms
12.1
In these Conditions "Incoterms" mean the international rules for the interpretation of trade terms of the International Chambers of Commerce as in force at the date when the Contract is made. Unless the Context otherwise requires, any term or expression which is defined in or given a particular meaning my the provisions Incoterms shall have the same meaning in these Conditions, but if there is any conflict between the provisions of Incoterms and these Conditions, the latter shall prevail
12.2
Where the Goods are supplied for export from the United Kingdom, the provisions of this clause 12 shall (subject to any special terms agreed in Writing between the Buyer and the Seller) apply not withstanding any other provision of these Conditions
12.3
The Buyer shall be responsible for complying with any legislation or regulations governing the importation of the Goods in to the country or destination and forthe payment of any duties on them
12.4
Unless otherwise agreed in Writing between the Buyer and the Seller, the Goods shall be delivered fob the air or sea port of shipment and the Sellers shall be under no obligation to give notice under section 32(3) of the Sale Of Goods Act 1979
12.5
The Buyer shall be responsible for arranging for testing and inspection of the Goods at the Sellers premises before shipment. The Seller shall have no liability for any claim in respect of any defect in the Goods which would be apparent on inspection and which is made after shipment, or in respect of any damage during transit
12.6
Payment of all amounts due to the Seller shall be made by irrevocable letter of credit opened by the Buyer in favour of the Seller and confirmed by a bank acceptable by the Seller, or by telegraphic transfer in to the Sellers aforementioned bank account or if the Seller agrees in Writing on or before acceptance of the Buyer order to waive this requirement, by acceptance by the Buyer and delivery to the Seller of a bill of exchange drawn on the Buyer payable 60 days after sight of the order to the Seller at such branch of National Westminster Bank in England as may be specified in the bill of exchange
12.7
Unless otherwise specifically agreed between the Seller and the Buyer all Exports sales shall be made by delivery to the Buyer's premises and the Seller's prices shall be increased to cover the Seller's costs in making such deliveries
12.8
The Buyer warrants that if an import licence or permit is required for the importation of the Goods into the county or destination then such import licence or permit has been obtained or would be obtain prior to shipment
13.
Cancelation, suspension and termination
13.1
If the Buyer shall purport to cancel the whole or any part of the Contract the Seller may by notice in Writing to the Buyer elect to treat the Contract as repudiated and the Buyers shall thereupon be liable to pay the Seller by way of liquidated damages a sum equal to all the expenses incurred by the Seller in connection with the Contract including an appropriate amount in respect of administration overheads, costs and loss of profit. The Sellers reasonable estimate of the expenses incurred shall be final and binding on the parties
13.2
If for any cause whatsoever beyond its control the Seller is unable to make any delivery on the applicable delivery date or preform any of its obligations under the Contract the Seller may be notice in Writing to the Seller terminate the Contract or suspend the Contract without liability of any loss or damage thereby occurred by the Buyer
14.
Intellectual property
14.1
The Buyer shall not infringe any patent, trade name, registered design, copyright industrial or other intellectual property right belonging to the Seller in relation to the Goods or any other goods or matters supplied by the Seller with or in relation to the Goods
14.2
The Buyer shall promptly reportto the Seller particulars of any use by any person of a patent, trade name, registered design, trade mark or get up of Goods which might amountto infringement of any patent, trade mark, registered design, copy right, industrial or other intellectual property right attaching to the Goods or to unfair competition on passing off
14.3
In the event that it comes to the notice of the Buyer that any person alleges that a patent, trade name, registered design, copy right, industrial or other intellectual property right is invalid or that they infringe any rights of that person or that they are open to any form of attach the Buyer shall not make any omissions but shall promptly report the matter to the Seller
14.4
The Seller shall have conduct of all proceedings relating to any patent, trade name, registered design, copy right, industrial or other intellectual property right attaching to the Goods
15.
Force majeure
15.1
In so far as the performance of the Contract by the Seller may be affected by any strike, any lack of available, shipping or transport or materials, any restriction regulation or decree by any local or municipal authority or government department or by any cause beyond the Seller's reasonable control (which shall be construed without reference to the proceeding causes) the Seller may elect at its absolute discretion either;
15.1.1
to terminate the Contract or;
15.1.2
to proceed to preform or continue performance under the Contract within a reasonable time after the termination of such events of circumstance
15.2
In the event that the Seller makes an election under clause 15.1 the Buyer shall accept the Goods or such part of them as are delivered to it not withstanding any delay
16.
Exclusion of Contract (rights of the third party) Act 1999
16.1
Nothing in these Conditions will confer on any third party any benefit or the right to enforce any terms of these Conditions
17.
Proper law
17.1
The Contract is and shall be deemed to be made in England and shall in all respects be governed by English Law and shall be subject to the non-exclusive jurisdiction of the English Court
18.
General
18.1
Any notice required or permitted to be given by either party to the other under these Conditions shall be in Writing and addressed to that other party at its registered office or principal place of business or such other address as may atthe relevanttime having been notified pursuant to this provision to the party giving the notice
T: +44 (0)1386 421005F: +44 (0)1386 422441E: sales@abssac.co.ukW: www.abssac.co.uk
ABSSAC
18.2
No waiver by the Seller of any breach of the Contract by the Buyer shall be consider as a waiver of any subsequent breach of the same or any other provision
18.3
If any provision of these Conditions is held by any competent authority to be invalided or unenforceable in whole or in part the validity of the other provisions of these Conditions and the remainder of the provision in question shall not be affected
18.4
No liability, warranty or any other claim can or will exist for any product(s) during or as a consequence of or any consequence whatsoever resulting directly or indirectly from or in connection with any of the following regardless of any other contributory cause or event from :
Terrorism Terrorism is defined as any act or acts including and not limited to the use or threat of force/violence/harm or damage to life or property orthe threat of such harm or damage including harm or damage by nuclear and or chemical and or biological and or radiological means. Caused or occasioned by any persons or groups or so claimed in whole or in part for political religious ideological or similar purposes. Or, any action taken in controlling preventing suppressing or in anyway relating to the above.
War War or invasion, act of foreign enemy hostilities of a warlike operation or operations (whether war be declared or not) civil war rebellion revolution insurrection civil commotion assuming the proportions of or amounting to an uprising military or usurped power. Or any action taken in controlling preventing suppressing or in any way relating to any of the above.
18.5
Any dispute arising under or in connection with these Conditions or the sale ofthe Goods shall be referred to arbitration by a single arbitrator appointed by agreement or (in default) nominated on the application of either party by the president forthetime being of the Law Society.
Abssac Limited may make changes to the contents/ improvements and/or changes in the product(s) or service(s) described in this publication at any time.
 
August 2013.
T: +44 (0)1386 421005F: +44 (0)1386 422441E: sales@abssac.co.ukW: www.abssac.co.uk